Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best holdfasts and bench dogs for thin benchtops and portable workbenches, with hole size, post length and clamping specs for every pick.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

The fastest answer: if your benchtop is 2 inches thick or less, skip the long forged holdfasts and tall dogs written up for heavy Roubo-style benches. A friction holdfast needs hole depth to wedge against, and a thin sheet-goods or portable-bench top does not give it that depth. Workholding for thin tops anchors differently: cam-action holdfasts that clamp inside a shallow 20mm hole, short 2-inch bench dogs that cannot rock, swivel pegs made for folding Workmate benches, and pinch dogs that need no hole at all.

Our top pick: IMPRESA Holdfast Dog-Hole Clamps (3-Pack). Runner-up: RUIITEN MFT Bench Holdfast 20mm (2-Pack).

The five picks below were chosen on published specifications. Between them they cover 3/4-inch holes, 20mm holes, Workmate holes, and no holes at all.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For a thin top with 20mm holes, the RUIITEN MFT Bench Holdfast pair is the strongest starting point, because its cam action clamps inside the hole instead of relying on friction wedging. For 3/4-inch holes, pair the IMPRESA cast iron holdfasts with the short POWERTEC 71500 nylon dogs. Workmate owners should start with the BLACK+DECKER swivel pegs, and anyone whose top cannot be drilled should use Taytools pinch dogs.

Table of Contents

  • Quick Answer
  • Why Thin Tops Change the Pick
  • IMPRESA Holdfast Dog-Hole Clamps, 3-Pack
  • RUIITEN MFT Bench Holdfast, 2-Pack (20mm)
  • POWERTEC 71500 Deluxe Bench Dogs, 8-Pack
  • BLACK+DECKER 79-010-4 Workmate Swivel Grip Pegs, 4-Pack
  • Taytools 500030 Pinch Dogs, 10-Pack
  • How to Choose Holdfasts and Dogs for a Thin Top
  • Who Should Skip These Picks
  • FAQ
  • Conclusion
  • Product and ASIN Reference

Why Thin Tops Change the Pick

A traditional holdfast holds by canting in its hole: the shaft binds against the front and back walls, and that binding needs depth. In a 3-1/2-inch slab there is plenty of wall to wedge against. In a 3/4-inch plywood top, or the roughly 1-inch top of a folding portable bench, the same holdfast has almost nothing to bite on, so it slips under planing pressure or has to be struck so hard that it damages the hole.

Thin tops also punish long bench dogs. A 4-inch dog in a 3/4-inch top is held by less than an inch of wood, so it tilts under sideways load. Short dogs behave far better because the top itself does most of the locating.

The third difference is what sits under the top. Portable and cabinet-style benches often have drawers or folding frames below the holes, so a long post can bottom out before the clamp tightens.

IMPRESA Holdfast Dog-Hole Clamps, 3-Pack

The IMPRESA set is the traditional option in this group: three cast iron holdfasts with 3/4-inch shafts, an 8-inch overall length, and a 3.5-inch shepherd’s hook reach. Drop one into a 3/4-inch hole, tap the top with a mallet to set it, and tap the back of the shaft to release it. The 1.3-inch square end gives the mallet a flat target.

On a thin top, treat this as the pick for the thicker end of thin: a solid 1-1/2-inch to 2-inch top gives the shaft enough wall to wedge against. On a single layer of 3/4-inch plywood it is the weakest holder here, which is why the cam-action RUIITEN below exists. The maker does not state a minimum bench thickness. Three in the box is useful: two can pin a panel at opposite corners while the third holds a stop.

Specs

      • Pack count: 3 holdfasts
      • Shaft diameter: 3/4 inch
      • Overall length: 8 inches
      • Reach: 3.5 inches
      • Material: cast iron
      • End design: 1.3-inch square striking end
      • Tier: budget

      RUIITEN MFT Bench Holdfast, 2-Pack (20mm)

      The RUIITEN holdfast solves the thin-top problem mechanically instead of by friction. Its post drops into a 20mm hole, the size used by MFT-style tops and most modern portable work tables, and a cam lever drives a pressure plate against the workpiece. Because the force comes from the cam rather than from the shaft wedging in the hole, it holds in tops far too thin for a traditional holdfast. Listing data describes three pressure levels, so the same clamp can pin a carving blank lightly or lean on a board for routing.

      The body is aluminum alloy with stainless steel hardware, at a listed set weight of 0.6 kilograms; the maker is listed as EZTOOL, part number EZ2022.

      The trade-off is hole size: 20mm only. If your top is drilled at 3/4 inch, use the IMPRESA and POWERTEC picks instead.

      Specs

          • Pack count: 2 holdfasts
          • Hole fit: 20mm
          • Material: aluminum alloy and stainless steel
          • Action: quick-acting cam with three pressure levels
          • Item weight: 0.6 kilograms (set)
          • Part number: EZ2022
          • Tier: mid-range

          POWERTEC 71500 Deluxe Bench Dogs, 8-Pack

          POWERTEC’s 71500 dogs are built around the dimension that matters on a thin top: length. Each dog is 2 inches long, so in a 3/4-inch or 1-inch top most of the dog is supported by the hole instead of levering above it, and it cannot tilt far under load. The listing states the 2-inch length accommodates a wide range of benchtop thicknesses, and the set is sold for worktables and portable workbenches with dog holes as well as full-size benches.

          The bodies are nylon rather than steel or brass, the gentlest option here against finished surfaces. Each dog carries a removable EVA brake insert that adds grip and comes out when you want a plain face. One side is squared as a clamping pad and the other curved, for flat stock and irregular shapes. Two 3/16-inch holes per dog accept dowels to make painter’s points.

          Eight dogs cover a four-dog planing rectangle plus spares, at 3.52 ounces for the set.

          Specs

              • Pack count: 8 bench dogs
              • Hole fit: 3/4 inch
              • Dog length: 2 inches
              • Material: nylon with removable EVA brake inserts
              • Faces: squared clamping pad and curved side
              • Item weight: 3.52 ounces (set)
              • Tier: mid-range

              BLACK+DECKER 79-010-4 Workmate Swivel Grip Pegs, 4-Pack

              Folding Workmate benches do not use standard dog holes. Their jaws carry a proprietary hole pattern, and the swivel peg is the bench dog of that system. These are the genuine BLACK+DECKER pegs, part number 79-010-4, sold four to a pack and listed as compatible with all Workmate models.

              Each peg drops into a jaw hole and swivels, so a pair can cradle round or tapered work that flat dogs cannot touch, while the jaw screws supply the clamping force. As simple stops, they also make a repeatable fence for crosscutting or sanding, with no drilling.

              Pegs are a wear item, since the originals get lost or crack, so a spare pack is worth having. Listing data gives a pack weight of 3.2 ounces; the peg material is not stated.

              Specs

                  • Pack count: 4 swivel pegs
                  • Compatibility: all BLACK+DECKER Workmate models
                  • Hole system: Workmate jaw holes (proprietary pattern)
                  • Item weight: 3.2 ounces (4-pack)
                  • Material: not stated
                  • Part number: 79-010-4
                  • Tier: budget

                  Taytools 500030 Pinch Dogs, 10-Pack

                  Pinch dogs are the oldest answer to a top that cannot hold a holdfast: they skip the bench entirely. Each Taytools pinch dog is a 2-inch-wide, 1/4-inch-thick alloy steel staple with legs tapered in two directions and a square back. Hammer the legs into the end grain of two boards, or into a board and the edge of the benchtop, and the tapered legs draw the pieces together while glue dries or while you work.

                  That makes them the only pick here for a top with no dog holes, a top too thin to drill, or a bench that cannot be modified. The dogs can be pulled and reused.

                  The limits are real: they mark the end grain they bite into, so they belong on rough stock and glue-ups rather than finished show faces, and they pinch rather than clamp downward. Sold as a pack of 10 by Taylor Toolworks.

                  Specs

                      • Pack count: 10 pinch dogs
                      • Size: 2 inches wide x 1/4 inch thick
                      • Material: alloy steel, black finish
                      • Legs: tapered in two directions, square back
                      • Installation: hammer-in, no dog hole required
                      • UPC: 700667471105
                      • Tier: budget

                      How to Choose Holdfasts and Dogs for a Thin Top

                      Start with the hole, not the clamp. Measure your dog holes with calipers or a drill bit. A 3/4-inch hole and a 20mm hole look identical across the shop but differ by about a millimeter, and no holdfast works well in the wrong size. If your bench is a Workmate, neither standard applies and the swivel pegs above are the system to buy into.

                      Next, measure the top and check what is underneath it. Friction holdfasts like the IMPRESA need roughly an inch and a half or more of solid top before they wedge reliably; below that, choose a cam-action clamp like the RUIITEN. Confirm the post length clears any drawers or frame below.

                      Match the dog to the load. Short nylon dogs such as the POWERTEC 71500 are planing and sanding stops, not vise substitutes. For downward force, a cam holdfast does the work. Keep pinch dogs for assembly and glue-ups, where their bite into end grain is a feature rather than a flaw.

                      Finally, buy in working sets: two holdfasts and four dogs cover most thin-top setups.

                      Who Should Skip These Picks

                      Skip this whole group if your bench is a thick slab. On a 3-inch or thicker top, long forged holdfasts and full-length bench dogs hold harder and are covered in the thick-bench guides for this site. The short dogs and cam clamps here give up holding power for clearance a heavy bench does not need.

                      Skip the friction holdfast if your top is a single sheet of 3/4-inch plywood or particleboard. It will not wedge reliably, and repeated mallet strikes will chew the holes oversize. Use the cam-action or peg options instead.

                      Skip pinch dogs for finished furniture surfaces; they bite into end grain by design and leave marks.

                      FAQ

                      Will a regular holdfast work in a 3/4-inch plywood top?

                      Usually not well. A friction holdfast wedges its shaft against the walls of the hole, and a 3/4-inch top gives it very little wall to grip, so it tends to slip under planing loads. A cam-action holdfast such as the RUIITEN is the reliable option at that thickness.

                      Can I use 20mm holdfasts in 3/4-inch dog holes?

                      No. A 20mm post is about a millimeter wider than a 3/4-inch hole and will not seat, while a 3/4-inch dog in a 20mm hole rattles and tilts. Measure first and buy the size that matches: the RUIITEN pair fits 20mm holes; the IMPRESA and POWERTEC picks fit 3/4-inch holes.

                      How many bench dogs does a thin-top bench need?

                      Four is the working minimum: two for a planing stop and two to fence the other axis. The POWERTEC set includes eight, which leaves spares. Workmate owners should keep a spare pack of pegs, the part most often lost.

                      Do pinch dogs damage the workpiece?

                      They leave small bite marks in the end grain they are driven into, because that bite is how they hold. On rough stock and glue-ups that will be trimmed or hidden, the marks do not matter. Keep them off finished show surfaces.

                      Conclusion

                      Thin and portable benches hold work differently from heavy benches, not worse. Match the hole size first, then choose the mechanism that suits your top thickness: the IMPRESA cast iron holdfasts for solid tops near 2 inches, the RUIITEN cam holdfasts for 20mm holes in tops too thin to wedge a shaft, the short POWERTEC 71500 dogs as everyday stops, genuine BLACK+DECKER swivel pegs for Workmate jaws, and Taytools pinch dogs when the top cannot be drilled at all.

                      Product and ASIN Reference

                      Product ASIN
                      IMPRESA Holdfast Dog-Hole Clamps (3-Pack) B0CBL33H63
                      RUIITEN MFT Bench Holdfast 20mm (2-Pack) B0B5D23QWM
                      POWERTEC 71500 Deluxe Bench Dogs (8-Pack) B07QNP9P1Y
                      BLACK+DECKER 79-010-4 Workmate Swivel Grip Pegs (4-Pack) B000QE7E4U
                      Taytools 500030 Pinch Dogs (10-Pack) B078VWXN3X
                      J
                      JD's Woodworks Editorial Team
                      We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
                      Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
                      Best Holdfasts and Bench Dogs for Thin Portable…Check price on Amazon

                      Related guides

                      Browse all Tools Workshop guides →

                      More from Amazon

                      Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

                      Amazon Business

                      A free business account with business pricing and bulk-buying tools for work, shop or home office.

                      Create a business account
                      Amazon Prime

                      Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

                      Start a Prime free trial
                      Audible

                      Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

                      Try Audible free
                      Amazon Music Unlimited

                      Ad-free music streaming. Eligible new subscribers can start with a free trial.

                      Try Music Unlimited free

                      As an Amazon Associate we earn from qualifying purchases.