Updated Nov 19, 2026· 9 min read

Key takeaways

  • Compare the best wood biscuits for plate joiners, including beech and birch No. 0, No. 10 and No. 20 packs, with sizes, counts and simple buying advice.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

The best wood biscuits are accurately cut, consistently 4 mm thick, and made from compressed beech or birch that swells evenly when it meets water-based glue. For most edge joints in three-quarter-inch stock, a No. 20 pack is the right default; a mixed pack covering No. 0, No. 10 and No. 20 suits shops that also build face frames and narrow parts. The five packs below cover each of those roles, from a single-size tube of name-brand beech biscuits to a bulk box for high-volume panel work.

Biscuits do two jobs in a joint: they align the faces of two boards so the surfaces sit flush, and they add glue surface inside the slot. Because every standard biscuit shares the same 4 mm thickness, the buying decision comes down to size, wood species, count and how consistent the sizing is from one biscuit to the next. This guide compares five packs on those points, using only the specifications each maker publishes.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Picks

  • Best mixed pack: Trend Beechwood Joining Biscuits Variety Pack — one 100-piece box with No. 0, No. 10 and No. 20 beech biscuits for shops that cut every slot size.
  • Best No. 20 tube: Porter-Cable No. 20 Plate Joiner Biscuits, 100-Count — name-brand beech biscuits in the size most panel and tabletop joints use.
  • Best No. 10 pack: Porter-Cable No. 10 Joiner Biscuits, 125-Piece — a mid-size biscuit for narrower stock, in a reusable container that keeps biscuits dry.
  • Best budget-tier birch pack: Wooden Joiner Biscuits, Size 20, Pack of 100 — a straightforward birch No. 20 pack for everyday edge joining.
  • Best bulk box: Tolux Wood Biscuits, Size No. 20, Pack of 1000 — a high-count beech pack for production runs and frequent glue-ups.

Porter-Cable No. 20 Plate Joiner Biscuits, 100-Count

Check price on Amazon

The Porter-Cable 5562 pack is the safe default for anyone who mainly joins three-quarter-inch and thicker stock edge to edge. No. 20 is the largest standard biscuit, so it puts the most glue surface in the slot and gives the most alignment help on wide panels, tabletops and cabinet sides. Porter-Cable lists the biscuit at 58 mm long by 24 mm wide, slightly larger than the Lamello reference size, and cuts it from beechwood, the traditional biscuit material that compresses cleanly and swells when glue is applied.

Because the biscuits come from the same maker as a widely used line of plate joiners, sizing is consistent with the depth stops marked on most machines. A 100-count package suits a home shop that glues up panels regularly without needing a bulk box, and the tube format keeps the remaining biscuits sealed away from shop humidity between projects. This is a mid-range pick: a branded, single-size pack bought for consistency rather than the lowest cost per biscuit.

Specs

  • Brand and model: Porter-Cable 5562
  • Biscuit size: No. 20
  • Dimensions: 58 mm x 24 mm, 4 mm thick
  • Material: Beechwood
  • Count: 100 biscuits per package
  • Grain and form: Compressed, die-stamped beech that swells on contact with water-based glue

Porter-Cable No. 10 Joiner Biscuits, 125-Piece

Check price on Amazon

The Porter-Cable 5561 pack covers the middle size. No. 10 biscuits measure 2-1/8 inches long by 3/4 inch wide, which makes them the right choice when a No. 20 slot would break through the edge of a narrower rail, a small drawer part or a frame member. They still give useful alignment on three-quarter-inch stock where the joint is short, and they are the size many woodworkers reach for on cabinet face frames that are too wide for a No. 0 but too narrow for a No. 20.

The 125-piece count is slightly more generous than the common 100-piece pack, and the biscuits ship in a reusable container, which matters more than it sounds: biscuits that absorb moisture from the air swell before they ever reach a slot and then fit poorly. A sealed container keeps them at their stamped thickness. Like its No. 20 sibling, this is a mid-range branded pack in beechwood, sized for the joiner depth stop marked 10 on any standard plate joiner.

Specs

  • Brand and model: Porter-Cable 5561
  • Biscuit size: No. 10
  • Dimensions: 2-1/8 in x 3/4 in, 4 mm thick
  • Material: Beechwood
  • Count: 125 biscuits per package
  • Packaging: Reusable storage container

Trend Beechwood Joining Biscuits Variety Pack

Check price on Amazon

The Trend BSC/MIX/100 variety pack is the most flexible option in this roundup because it covers all three standard sizes in one box: 30 No. 0 biscuits, 30 No. 10 biscuits and 40 No. 20 biscuits, for 100 pieces in total. That split matches how most shops actually work, with No. 20 doing the bulk of panel glue-ups and the smaller sizes kept on hand for face frames, picture frames and narrow parts where a big slot will not fit.

Trend cuts its biscuits from beech and describes them as die-cut pieces that expand when they come into contact with a woodworking adhesive, which is exactly the behaviour a biscuit joint depends on. For a first biscuit purchase, or for a small shop that does not want three separate tubes on the shelf, this mixed box is the practical premium-tier choice: one purchase covers every depth stop on the joiner. The trade-off is that heavy users of a single size will empty the No. 20 portion long before the No. 0 portion, and will then top up with a single-size pack such as the Porter-Cable tubes above.

Specs

  • Brand and model: Trend BSC/MIX/100
  • Biscuit sizes: No. 0, No. 10 and No. 20
  • Contents: 30 x No. 0, 30 x No. 10, 40 x No. 20
  • Material: Beech wood
  • Count: 100 biscuits per pack
  • Manufacturer: Trend Routing Technology

Wooden Joiner Biscuits, Size 20, Pack of 100, Premium Birch

Check price on Amazon

This unbranded 100-piece pack is the budget-tier route into No. 20 biscuits. The biscuits are made from birch rather than beech, which is the main specification difference from the branded packs above. Birch biscuits work the same way in the slot: the compressed wood takes up moisture from water-based glue, swells, and locks the two halves of the joint in alignment while the glue cures. For painted projects, shop furniture, jigs and general edge joining, that is all a biscuit is asked to do.

Because the pack sticks to the single most-used size, it suits a woodworker who already owns a plate joiner, works mainly in three-quarter-inch or thicker stock, and simply needs to restock the size that runs out first. Published detail on this pack is limited to the size, count and material, so buyers who want a stated dimension tolerance or a named maker should step up to one of the branded packs instead. As a low-commitment way to keep No. 20 biscuits on the shelf, it covers the basics.

Specs

  • Biscuit size: No. 20
  • Material: Premium birch wood
  • Count: 100 pieces per pack
  • Form: Compressed wood joining biscuits for plate joiners
  • Intended joints: Edge-to-edge and panel joints in standard stock

Tolux Wood Biscuits, Size No. 20, Pack of 1000

The Tolux pack answers a different problem: running out. With 1,000 No. 20 beech biscuits in one box, it is aimed at production work, batch-built cabinets and any shop that glues panels every week. Buying at this count also has a consistency argument in its favour, because every biscuit in a long run of work comes from the same batch, stamped to the same thickness, so slot fit stays predictable across a whole project.

No. 20 is the rational size to stock in bulk, since it covers the widest range of everyday joints in three-quarter-inch and thicker material, from tabletops to cabinet sides. The biscuits are beech, the standard material for the job, and are made to swell against the slot walls once glue is applied. The obvious caveat is storage: a box of 1,000 biscuits needs a dry shelf or a sealed bin, because biscuits that pick up damp air before use can swell early and jam in the slot. For a busy shop that can store them properly, this is the premium-count option that ends mid-project shortages.

Specs

  • Brand: Tolux
  • Biscuit size: No. 20
  • Material: Beech wood
  • Count: 1,000 biscuits per pack
  • Form: Compressed wood joining biscuits for plate joiners
  • Best suited to: High-volume panel and cabinet work

How to Choose Wood Biscuits

Start with size. The three standard sizes share the same 4 mm thickness and differ in length and width: No. 0 measures about 47 x 15 mm, No. 10 about 53 x 19 mm, and No. 20 about 56 x 23 mm in the Lamello reference sizing, with some brands running a millimetre or two larger. Use the largest biscuit the part accepts. No. 20 is the default for edge joints in three-quarter-inch and thicker stock. Step down to No. 10 for narrower rails and short joints, and to No. 0 for face frames, small frames and thin parts where a longer slot would break out.

Pick a material. Beech is the traditional biscuit wood: it compresses evenly, stamps to a consistent thickness and swells reliably in water-based glue. Birch biscuits, like the budget pack above, follow the same principle and suit general work. Either way, what matters most is consistency, because a biscuit that is too thick jams in the slot and one that is too thin gives sloppy alignment.

Match the count to your pace. A 100-piece pack is enough for occasional furniture projects. Shops that glue panels weekly should look at bulk counts, while anyone who cuts all three sizes should start with a variety pack and then restock single sizes as they run low.

Store biscuits dry. Biscuits are kiln-dried and compressed so they can swell in the joint. Left in humid air they absorb moisture, swell early and stop fitting the slot. Keep them in a sealed container or tube, and if a biscuit will not slide into a dry slot with light hand pressure, set it aside rather than forcing it.

Check the depth stop, not the brand. Any standard biscuit works in any plate joiner that has the matching depth stop, so there is no need to match the biscuit brand to the tool brand. Set the joiner to the number stamped on the biscuit size, cut a test slot in scrap, and confirm the biscuit sits just below the surface before gluing up real parts.

FAQ

What size wood biscuit should I use for three-quarter-inch boards?

Use a No. 20 biscuit for most edge joints in three-quarter-inch stock, because it is the largest standard size and gives the most glue surface and alignment help. Drop to a No. 10 only where the part is too narrow for the No. 20 slot, such as a slim rail, and use a No. 0 for face frames and small parts.

Do biscuits actually strengthen a joint?

A biscuit adds glue surface inside the slot and, more importantly, keeps the two faces aligned while the glue cures, which is why panel glue-ups come out flatter. On long-grain edge joints the glue line between the boards does most of the work, while in end-grain, mitre and T-joints the biscuit contributes a larger share of the holding power.

Can I mix biscuit brands with my plate joiner?

Yes. Biscuit sizes are standardised, and every plate joiner has depth stops marked 0, 10 and 20 to match them, so any brand of biscuit works with any brand of joiner. Small dimension differences of a millimetre or two exist between makers, so a quick dry fit in a test slot is a sensible check when changing brands.

How should wood biscuits be stored?

Keep biscuits in a sealed container in a dry place. They are dried and compressed during manufacture so they can swell when glue is applied, and biscuits that absorb moisture from humid shop air can swell before use and no longer fit the slot. A reusable tube or lidded jar keeps them at their stamped 4 mm thickness.

Conclusion

For most woodworkers, the choice is simple: stock No. 20 biscuits for everyday panel and edge work, and keep smaller sizes for narrow parts. The Trend variety pack is the best starting point because it covers all three sizes in beech. The two Porter-Cable tubes are the consistent single-size restocks, in No. 20 and No. 10. The birch 100-pack covers No. 20 restocking at the budget tier, and the Tolux box of 1,000 ends the problem of running out mid-project for busy shops. Match the size to the part, store the pack dry, and any of these five will keep joints aligned and flush.

J
JD's Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Wood Biscuits: Top Picks for Strong, Flush…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.