Key takeaways
- Compare the best Japanese pull saws for woodworking, from a do-it-all ryoba to fine dozuki and flush-cut saws, with blade specs, tooth counts and tips.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
The best Japanese pull saw for most woodworkers is a 240 mm ryoba, because its two cutting edges — rip teeth on one side, crosscut teeth on the other — handle both board breakdown and joinery with one thin-kerf blade. The SUIZAN Ryoba 9.5 inch is the standout first saw here. For fine joinery, a spined dozuki such as the SUIZAN Dozuki 9.5 inch or the Gyokucho 372 tracks a knife line more precisely, the compact Gyokucho 770-3600 Ryoba suits smaller stock, and the SUIZAN Flush Cut Saw 5 inch trims dowels and plugs level with the surface.
As an Amazon Associate, we earn from qualifying purchases.
Every saw below is a real, currently listed Japanese hand saw made in Japan by an established maker. The sections that follow explain what separates them — saw pattern, blade length, tooth count, plate thickness, and kerf — and how to match a saw to the work you actually do.
Table of Contents
- Quick Picks
- 1. SUIZAN Ryoba Double Edge Saw 9.5 Inch
- 2. SUIZAN Dozuki Dovetail Saw 9.5 Inch
- 3. Gyokucho Razorsaw 372 Dozuki
- 4. Gyokucho 770-3600 Razor Ryoba Saw
- 5. SUIZAN Flush Cut Saw 5 Inch
- How to Choose a Japanese Pull Saw
- FAQ
- Conclusion
Quick Picks
- Best first Japanese saw: SUIZAN Ryoba Double Edge Saw 9.5 inch — one blade rips and crosscuts, so it covers the widest range of bench work.
- Best for dovetails and tenons: SUIZAN Dozuki Dovetail Saw 9.5 inch — a steel spine keeps the thin blade straight on joinery lines.
- Best rip-tooth dozuki: Gyokucho Razorsaw 372 — rip-filed teeth made for cutting along the grain on tails and pins.
- Best compact ryoba: Gyokucho 770-3600 Razor Ryoba Saw — a 180 mm double-edge blade for smaller stock and tight spaces.
- Best for flush trimming: SUIZAN Flush Cut Saw 5 inch — a flexible, unset-tooth blade that trims dowels and plugs without marring the surface.
1. SUIZAN Ryoba Double Edge Saw 9.5 Inch
The SUIZAN Ryoba is the saw to buy first because a ryoba carries two tooth patterns on a single blade: a coarse rip edge for cutting along the grain and a finer crosscut edge for cutting across it. That makes this one saw useful for sizing boards, cutting tenon cheeks and shoulders, and trimming parts to length, all with the narrow kerf that makes pull saws easy to steer. It sits in the mid-range tier of this list.
The blade is 240 mm long and only 0.5 mm thick, held to the handle by a single screw so it can be swapped when the impulse-hardened teeth eventually dull. The handle is wingnut wood wrapped by hand in rattan, and a zippered storage bag is included to protect the teeth in a tool roll or drawer.
Specs:
- Type: Ryoba double-edge pull saw
- Blade length: 9.5 inches (240 mm)
- Teeth: 9 TPI rip edge, 15 TPI crosscut edge
- Blade thickness: 0.5 mm (0.02 inch)
- Kerf: 0.8 mm (0.03 inch)
- Blade material: Japanese steel
- Blade: Replaceable, held by one screw
- Handle: Wingnut wood with hand-wrapped rattan
- Included: Zippered storage bag
- Made in Japan
2. SUIZAN Dozuki Dovetail Saw 9.5 Inch
A dozuki adds a stiff spine along the back of the blade, and that spine is what makes this SUIZAN the joinery pick. It holds the very thin 0.3 mm blade straight and flat, so the saw starts easily on a knife line and tracks it through dovetails, tenon shoulders, and small miters with a fine, clean kerf. The listing describes the tooth pattern as suited to rip, cross, and angled cuts, which covers the mix of cuts in drawer and box joinery. It is the budget-tier dozuki in this roundup.
The trade-off is depth: the spine limits how deep the blade can sink, so a dozuki is a joinery saw rather than a board-breakdown saw. The blade is replaceable, so when the fine teeth dull, the saw returns to service with a fresh blade instead of a sharpening session.
Specs:
- Type: Dozuki spined pull saw
- Blade length: 9.5 inches (240 mm)
- Blade thickness: 0.012 inch (0.3 mm)
- Teeth: Fine teeth for rip, cross, and angled cuts (per listing)
- Spine: Steel back
- Blade material: Japanese steel
- Blade: Replaceable
- Model: SDE-001
- Made in Japan
3. Gyokucho Razorsaw 372 Dozuki
Most dozuki saws are filed for crosscutting, but the Gyokucho 372 is a rip dozuki: its teeth are filed for cutting along the grain, which is exactly the direction of most dovetail cuts. Published figures put the teeth at 19 per inch with impulse hardening for long edge life, and the resulting kerf is just 0.018 inch, so pins and tails come off the saw needing very little paring. It is the premium-tier dozuki here.
The blade is removable for storage and replacement, and the traditional wooden handle carries a rattan cane wrapping. At a published weight of 8-1/4 ounces, it is light enough that the saw’s own weight does most of the work on the pull stroke, which is how these thin blades are meant to be used — forcing a dozuki is how teeth get bent.
Specs:
- Type: Dozuki spined pull saw, rip-filed teeth
- Blade length: 9-7/16 inches (240 mm)
- Teeth: 19 TPI, impulse-hardened
- Kerf: 0.018 inch
- Overall length: 23-7/8 inches
- Weight: 8-1/4 ounces
- Blade material: High-speed steel (per listing)
- Blade: Replaceable
- Handle: Wood with rattan cane wrapping
- Made in Japan
4. Gyokucho 770-3600 Razor Ryoba Saw
The 770-3600 is Gyokucho’s compact ryoba, built around a 180 mm double-edge blade. The Amazon listing gives 17 teeth per inch on the crosscut edge and 6 teeth per inch on the rip edge, so the same rip-and-crosscut versatility as a full-size ryoba is packed into a saw that suits smaller stock, detail work, and benches where a 240 mm blade feels oversized. It is a budget-tier pick.
Instead of the traditional rattan-wrapped handle, this model uses a contoured plastic grip, and the blade plate is 0.5 mm thick like the larger ryoba above. Replacement blades are sold under the maker’s S-291 number, so the saw stays serviceable long-term.
Specs:
- Type: Ryoba double-edge pull saw
- Blade length: 180 mm (7 inches)
- Teeth: 17 TPI crosscut edge, 6 TPI rip edge (per listing)
- Blade thickness: 0.5 mm
- Blade material: High-speed steel (per listing)
- Blade: Replaceable (maker’s S-291 blade)
- Handle: Contoured plastic grip
- Model: 770-3600 (Gyokucho No. 291)
- Made in Japan
5. SUIZAN Flush Cut Saw 5 Inch
A flush cut saw solves a different problem: trimming dowels, plugs, and pegs level with a finished surface. The SUIZAN’s 120 mm blade is flexible and its teeth have no set, so the blade can lie flat against the work and shear a plug off without scratching the surrounding wood. The kerf is listed at 0.012 inch, the same as the blade thickness, because the teeth do not splay outward. It is a budget-tier specialty saw.
The blade is double-edged, with a 17 TPI edge and a 25 TPI edge, giving a faster cut for softwood plugs and a finer cut for hardwood. At 5 inches it is also the most compact saw in this roundup, easy to keep in an apron pocket or bench drawer for the small trimming jobs that come up on nearly every project.
Specs:
- Type: Flush cut pull saw, double edge
- Blade length: 5 inches (120 mm)
- Teeth: 17 TPI and 25 TPI edges
- Blade thickness: 0.012 inch (0.3 mm)
- Kerf: 0.012 inch (teeth have no set)
- Blade: Flexible for flat-lying cuts
- Blade material: Japanese steel
- Model: SFL-001
- Made in Japan
How to Choose a Japanese Pull Saw
Start with the saw pattern. The three patterns in this roundup cover almost all hand-saw work in a furniture shop. A ryoba is the generalist: rip teeth on one edge, crosscut teeth on the other, and no spine, so it can cut as deep as the blade is tall. A dozuki is the specialist: a spine stiffens a very thin blade for the straightest, finest joinery cuts, at the cost of cutting depth. A flush cut saw is the finisher, with a flexible, unset blade made to trim protruding parts flat.
Match tooth count to the cut. Coarser teeth cut faster and clear dust better in thick stock; finer teeth start more easily and leave a cleaner surface in thin stock. Rip work along the grain usually wants a coarser edge, while crosscuts and shoulder lines benefit from finer teeth. The double-edge ryoba format sidesteps the choice by carrying both.
Pay attention to blade thickness and kerf. Japanese pull saws cut on the pull stroke, so the blade is in tension while cutting and can be far thinner than a push-saw blade. A thinner blade removes less material, takes less effort, and is easier to keep on a line — but it is also easier to kink if it is forced or twisted, so light, straight strokes matter more than pressure.
Plan on replacing, not sharpening. The teeth on these saws are impulse-hardened, which keeps them sharp for a long time but makes them impractical to resharpen with a file. Every saw in this list takes a replaceable blade, and the blade model matters: check the maker’s replacement number before buying, and confirm blades for that model are easy to order.
Consider size and handle. A 240 mm blade gives a longer, smoother stroke for general work, while a 180 mm or shorter blade offers more control in tight spots and on small parts. Traditional rattan-wrapped wooden handles and modern molded grips both work well; the choice is about grip comfort and how the saw balances in your hand.
FAQ
What is the difference between a ryoba and a dozuki?
A ryoba has teeth on both edges of an unspined blade — rip teeth on one side and crosscut teeth on the other — so it can cut deep and handle general work. A dozuki has teeth on one edge and a stiff spine along the back, which keeps its thinner blade straighter for fine joinery but limits how deep it can cut.
Can Japanese pull saws be sharpened?
Generally, no. The teeth are impulse-hardened, so a standard saw file will not cut them effectively. These saws are designed around replaceable blades instead: when the teeth dull or get damaged, the blade is swapped for a new one, which is why checking the replacement blade model before buying matters.
Which Japanese pull saw should a beginner buy first?
A 240 mm ryoba is the usual first choice because its two edges cover rip cuts and crosscuts with a single tool, so it handles both board sizing and joinery practice. A dozuki is the natural second saw, bought when dovetails, tenons, and other fine joinery become the focus.
Do Japanese pull saws work well in hardwood?
Yes. The thin blades and narrow kerfs reduce the effort needed in dense stock, and the pull stroke keeps the blade straight under load. Fine, impulse-hardened teeth hold up well in hardwoods such as oak and maple, although coarse work in very thick stock goes faster with a coarser tooth pattern.
Conclusion
For a first Japanese pull saw, the SUIZAN Ryoba 9.5 inch covers the most ground: two tooth patterns, a replaceable blade, and a kerf thin enough for joinery. Add the SUIZAN Dozuki or the Gyokucho 372 when dovetails and tenon work become the priority, reach for the Gyokucho 770-3600 when a smaller ryoba fits the work better, and keep the SUIZAN Flush Cut Saw on hand for the trimming jobs no other saw does as cleanly. Match the pattern to the cut, let the pull stroke do the work, and any of these five will earn its place at the bench.
Related guides
You might also like
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.