Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best adzes for woodworking, from a forged bowl adze and Austrian gutter adze to three-piece carving sets, with specs and buying advice.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is BeaverCraft AX2 Forged Adze, with Mapsist Set of 3 Adzes as a strong alternative.

An adze is the fastest hand tool for hollowing and shaping wood: its blade sits at a right angle to the handle, so each swing scoops out a controlled chip instead of splitting along the grain. Carvers reach for one to hollow bowls and kuksa cups, seat makers use one to dish out chair seats, and timber workers swing longer-handled versions to flatten and texture beams. The five adzes below cover that whole range, from a single forged bowl adze to three-piece sets that pair straight and curved blades, plus an Austrian-made gutter adze for bigger work.

If you mostly carve bowls and spoons, start with a curved blade and a shorter handle for control. If you flatten stock as often as you hollow it, a set that includes a straight adze saves buying a second tool later, and it gives you a flatter blade for smoothing beams, staves, and chair-seat blanks between the curved work.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • Quick Answer
    1. BeaverCraft AX2 Forged Adze
    1. Mapsist Set of 3 Adzes
    1. Mueller Gutter Adze Medium
    1. Deargooday 3-Piece Adze Set
    1. Mapsist Set of 2 Curved Adzes
  • How to Choose the Right Adze
  • Who Should Skip an Adze
  • FAQ
  • Final Verdict

Quick Answer

For most carvers, the BeaverCraft AX2 is the best adze for woodworking: a forged curved blade, an ash handle, and a leather sheath cover bowl and spoon work well. Bowl specialists should look at the Mapsist curved pair and three-piece sets, while the Austrian-made Mueller gutter adze suits larger troughs and seats.

1. BeaverCraft AX2 Forged Adze

BeaverCraft AX2 Forged Adze

BeaverCraft AX2 Forged Adze

Check price on Amazon

The AX2 is a compact curved adze built for green wood carving, and it is the easiest single pick on this list for bowl, spoon, and ladle work. The curved blade follows the inside of a bowl blank and clears chips in the cross-grain strokes that hollowing demands, while the head is fixed securely so the edge tracks where you aim it.

BeaverCraft forges the head from 1066 high-carbon steel, a published specification that suits an edge tool that gets stropped often. The handle is ashwood treated with linseed oil and wax, and the package includes a genuine leather sheath with a belt loop, which matters for a tool that travels to a stump or a carving bench. It sits in the mid-range tier: one dedicated tool, finished and sheathed, rather than a bare head you haft yourself.

Specs

  • Brand: BeaverCraft
  • Model: AX2
  • Blade profile: curved (gutter) for hollowing
  • Blade material: 1066 high-carbon steel, forged
  • Handle: ashwood, treated with linseed oil and wax
  • Included: leather sheath with belt loop
  • Best for: bowls, spoons, ladles, and kuksa cups

2. Mapsist Set of 3 Adzes

Mapsist Set of 3 Adzes (Straight, Large Curved, Small Curved)

Mapsist Set of 3 Adzes (Straight, Large Curved, Small Curved)

Check price on Amazon

This three-piece set covers the full adze workflow in one purchase: a straight adze for flattening and dressing surfaces, plus large and small curved adzes for hollowing work at two scales. The large curved blade opens up a bowl or trough quickly, and the small curved blade takes over for cups, scoops, and the tight ends of a hollow where a bigger edge would bridge across the curve.

The bevel layout is deliberate. Both curved adzes are outside beveled, which suits scooping cuts that ride the bevel through the hollow, while the straight adze is inside beveled for flat work. The handles are slip-fit beechwood, a traditional arrangement that lets you knock a handle off for sharpening and reseat it without wedges or glue. For a carver who wants one kit for seats, bowls, and beams, this mid-range set is the most complete option here.

Specs

  • Contents: straight adze, large curved adze, small curved adze
  • Bevels: curved adzes outside beveled, straight adze inside beveled
  • Handles: slip-fit beechwood
  • Manufacturer: Mapsist Ltd.
  • Best for: carvers who both hollow and flatten stock

3. Mueller Gutter Adze Medium

Mueller Gutter Adze Medium

Mueller Gutter Adze Medium

Check price on Amazon

Mueller has forged adzes in Austria for generations, and this medium gutter adze is the premium pick for larger hollow work: dough troughs, big bowls, and dished chair seats. The two-inch face moves a serious chip per swing without the weight of the large three-inch model, and the inside bevel is the traditional choice for gutter work because it helps the edge lift out of the cut at the end of each stroke.

The handle runs seventeen and a half inches, longer than the carving adzes above, which gives the swing more leverage and keeps your knuckles clear of the work. The listing notes the blade is Austrian steel and will need sharpening before first use, which is normal for this class of tool; the maker also lists a lifetime guarantee. Choose this one if your projects are trough- and seat-sized rather than spoon-sized.

Specs

  • Maker: Mueller, made in Austria
  • Model: 2071,50, gutter adze, medium
  • Face width: 2 inches
  • Handle length: 17.5 inches
  • Bevel: inside bevel
  • Blade: Austrian steel, arrives needing sharpening
  • Best for: troughs, large bowls, and chair seats

4. Deargooday 3-Piece Adze Set

Deargooday 3-Piece Adze Set

Deargooday 3-Piece Adze Set

Check price on Amazon

The Deargooday set is the budget way to get straight, big curve, and small curve adzes in one box. The heads are drop forged from AISI-4150 steel, heat treated and tempered to a published hardness range of HRC 50-55, which is a sensible specification for tools that will be resharpened on stones and files in the shop.

Each head combines the blade with a claw hammer poll, and the drop-shaped hole in the center of the head works as a nail puller, so the set doubles as a rough carpentry and garden tool for grubbing and debarking. The beech handles use a slip-on fit, and the maker notes you should trim roughly half an inch from the handle during assembly so the head seats properly. That small setup step is the trade-off for the budget tier.

Specs

  • Contents: straight adze, big curve adze, small curve adze
  • Steel: AISI-4150, drop forged, heat treated and tempered
  • Hardness: HRC 50-55
  • Handles: beech wood, slip-on fit, trimming required at assembly
  • Head design: blade with claw hammer poll and nail-pulling hole
  • Best for: first-time adze buyers and rough shaping

5. Mapsist Set of 2 Curved Adzes

Mapsist Set of 2 Curved Adzes (Set2N)

Mapsist Set of 2 Curved Adzes (Set2N)

Check price on Amazon

If hollowing is all you do, this pair skips the straight adze and gives you two curved blades instead: a large curved adze for opening bowls and troughs, and a small curved adze for cups, scoops, and detail hollowing. Both blades are outside beveled, the configuration most bowl carvers prefer for scooping cuts, and both are high carbon steel.

The listed weight for the set is just over three pounds, so the pair travels easily to a carving stump or a green woodworking class. Because the two edges share one bevel style and one handle pattern, sharpening and technique carry straight across from one tool to the other. It is a focused, budget-to-mid-range kit for carvers who already own a drawknife or a straight edge tool for flat work.

Specs

  • Contents: large curved adze, small curved adze
  • Bevels: outside bevels on both blades
  • Blade material: high carbon steel
  • Handle material: wood
  • Model: Set2N
  • Manufacturer: Mapsist Ltd.
  • Listed weight: 3.08 pounds for the set
  • Best for: bowl and trough carvers who skip flat work

How to Choose the Right Adze

Start with blade profile. A straight adze cuts flat or gently convex surfaces: beams, staves, chair-seat blanks, and the outside of a bowl. A curved or gutter adze hollows concave work: bowls, troughs, cups, and dished seats. Most carvers eventually own both, which is why the three-piece sets on this list pair one straight blade with two curved ones.

Next, check the bevel side. An outside bevel rides on the outside of the curve and is the common choice for scooping inside a bowl, while an inside bevel, traditional on gutter adzes, helps the edge exit the cut cleanly on cross-grain strokes. Neither is wrong; match the bevel to the cut you make most.

Handle length sets the swing. Short handles around a foot suit one- and two-handed carving control at a stump, while handles in the seventeen-inch range add leverage for trough-sized work. Finally, look at the steel and the fit. Forged high-carbon and alloy steels strop back to a working edge quickly, and slip-fit handles make sharpening easier because the head comes off. A sheath is worth having on any adze you carry.

Who Should Skip an Adze

Skip the adze if your work is mostly flat and dimensioned: cabinet parts, boxes, and joinery are plane, chisel, and saw work, and an adze adds nothing there. Also skip it if you are not ready to maintain an edge. Adzes arrive anywhere from ready to deliberately unsharpened, and a dull adze is tiring and inaccurate, so budget for a stone, a file, and a strop alongside the tool.

Woodworkers who hollow only occasionally may be better served by a bent gouge and a mallet, which cut slower but with more control for a beginner. And anyone uncomfortable swinging a sharp edge toward their own stance should start with gouges and a carving axe instead, since safe adze technique depends on stance, a clear swing path, and work held firmly on a stump or bench.

FAQ

What is the difference between a straight adze and a curved adze?

A straight adze has a flat edge profile and cuts flat or slightly convex surfaces, such as beams, staves, and seat blanks. A curved adze, often called a gutter adze, has a swept edge that scoops out concave hollows like bowls and troughs. Chair seats sit between the two and are worked with either, depending on the depth of the dish.

Should the bevel be on the inside or the outside of the blade?

Outside bevels are common on bowl adzes because the bevel rides against the wood and guides the scooping cut. Inside bevels are traditional on gutter adzes and help the blade lift out of cross-grain cuts. Sets like the Mapsist three-piece mix both: outside bevels on the curved blades and an inside bevel on the straight blade.

How do you sharpen an adze?

Slip-fit handles come off so the head can be worked on a bench stone or with a file, following the existing bevel. Most carvers finish on a leather strop shaped or padded to match the curve of the blade. Because the edge is curved, flat stones only contact part of it at a time, so work in sections and check the whole edge.

Can an adze replace a drawknife or a gouge?

Not fully. An adze removes wood fastest inside hollows and across flat surfaces with a swinging cut, a drawknife peels and shaves convex shapes with a pulling cut, and a gouge gives the slowest, most controlled cut for detail. The tools overlap on rough shaping, but a complete green woodworking kit usually includes all three.

Final Verdict

For a single tool that covers most carving, choose the BeaverCraft AX2: forged 1066 steel, a finished ash handle, and a sheath make it the most complete mid-range pick. If you want every blade profile at once, the Mapsist Set of 3 pairs a straight adze with two curved ones, and the Deargooday set delivers the same three shapes at a budget tier with a small assembly step. Bowl-only carvers should take the Mapsist Set of 2, while the Mueller gutter adze is the premium step up for troughs and chair seats, with Austrian forging and a longer, more leveraged swing.

J
JD's Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Adzes for Woodworking: Bowl, Gutter and Set…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.