Updated Nov 19, 2026· 9 min read

Key takeaways

  • Compare five of the best hand planes for smoothing, flattening and trimming wood, with verified specs, honest limits and advice on choosing the right type.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A good hand plane does work that sanders and machines struggle to match: it flattens a board without rounding its edges, smooths figured grain without tearing it, and trims end grain cleanly enough to skip sanding altogether. The catch is that planes are sold by number, pattern and bed angle, and the differences between a No. 4 smoother, a low-angle jack and a block plane are not obvious until you understand what each one is built to do.

This guide compares five hand planes that cover the core jobs in a small workshop: final smoothing, general flattening, end-grain work and one-handed trimming. Every pick below is a current production model sold on Amazon US, and the specifications quoted are the ones published by the maker or listed for that exact model. Where a plane has a real weakness, such as a thin stock iron or a weight penalty, that is stated plainly rather than glossed over.

As an Amazon Associate, we earn from qualifying purchases.

Quick picks

  • Stanley No. 4 Adjustable Bench Plane (12-404) — the low-commitment way into bench planes, a classic Bailey pattern smoother for learning setup and sharpening.
  • Jorgensen No. 4 Smoothing Plane — a heavier ductile iron smoother with an adjustable mouth and an easy-sharpening O1 iron, suited to daily bench work.
  • Stanley Sweetheart No. 4 Smoothing Plane (12-136) — the premium smoother of the group, with a thick A2 iron and one-piece base and frog for figured woods.
  • Stanley Sweetheart No. 62 Low Angle Jack Plane (12-137) — the versatile bevel-up option for shooting end grain, flattening panels and smoothing with one tool.
  • Stanley Sweetheart No. 9-1/2 Block Plane (12-138) — the one-handed trimmer for chamfers, end grain and fitting work, with an adjustable mouth.

Stanley No. 4 Adjustable Bench Plane (12-404)

Check price on Amazon

The 12-404 is Stanley’s entry-level No. 4, built on the Bailey pattern that has defined bench planes for over a century. It is a bevel-down smoothing plane sized for final surface work: flattening small panels, cleaning up glue lines and taking the last fine shavings before a finish goes on.

Specs

  • Brand and model: Stanley 12-404
  • Type: No. 4 bench plane, smoothing pattern
  • Cutter: 2 inch wide iron, hardened and tempered steel
  • Body: cast iron with an epoxy coating, precision-ground sole and sides
  • Adjustment: depth and lateral adjustment with an adjustable frog

Who it suits

This is the plane to buy when you want to learn how bench planes work without committing much money to the experiment. The Bailey adjusters teach the standard depth and lateral controls found on almost every bench plane, and replacement irons and parts are easy to find because the pattern is so common.

Honest limitations

The stock iron is thinner than the irons in the premium planes below, so it is more prone to chatter in difficult grain if the mouth is left wide. Expect to spend time on first setup: flattening checks, honing the iron and setting the frog are part of owning this plane, not optional extras.

Jorgensen No. 4 Smoothing Plane

Jorgensen built its name on clamps, and its No. 4 applies the same heavy-casting approach to a bench plane. The body is ductile iron rather than ordinary grey cast iron, which tolerates drops and knocks better, and the maker machines the base to a stated flatness tolerance instead of leaving flatness to chance.

Specs

  • Brand and model: Jorgensen No. 4, model 70730
  • Sole length: 10 inches
  • Body: ductile iron, drop-tested by the maker, base machined to a 0.003 inch flatness tolerance
  • Blade: O1 tool steel iron
  • Handles: beechwood tote and knob, aluminium alloy lever cap
  • Adjustment: adjustable cutting depth and adjustable mouth

Who it suits

The adjustable mouth is the headline feature at this level: closing it down supports the fibres just ahead of the edge and reduces tear-out on figured boards, while opening it up clears thick shavings during heavier work. The O1 iron sharpens quickly on ordinary water stones, which suits woodworkers who hone little and often.

Honest limitations

Ductile iron and a long sole make this a noticeably heavy No. 4, and that weight tires the wrist during long smoothing sessions or overhead work. O1 steel also gives up its edge sooner than A2, so expect more frequent honing in abrasive hardwoods.

Stanley Sweetheart No. 4 Smoothing Plane (12-136)

Check price on Amazon

The Sweetheart line is Stanley’s premium range, and the 12-136 upgrades the standard No. 4 formula in the two places that matter most: the iron and the casting. The base and frog are cast as a single piece, which removes a source of flex and chatter, and the iron is far thicker than a standard bench plane blade.

Specs

  • Brand and model: Stanley Sweetheart 12-136
  • Type: No. 4 bench plane, 10-5/8 inches long, 2-1/2 inches wide
  • Cutter: 2 inch wide iron, extra-thick 1/8 inch A2 steel
  • Body: one-piece base and frog casting
  • Adjustment: Norris-style adjuster for depth and lateral movement

Who it suits

This is the smoother for figured maple, interlocked grain and other woods that punish thin irons and loose frogs. The thick A2 blade holds an edge through long sessions, and the combined adjuster makes fine depth changes without disturbing lateral alignment.

Honest limitations

A2 steel is slower to hone than O1 or high-carbon steel, and it responds best to diamond or ceramic abrasives rather than soft water stones. The plane also sits at the premium end of this group, so it makes most sense once you know a No. 4 is the size you reach for most.

Stanley Sweetheart No. 62 Low Angle Jack Plane (12-137)

Check price on Amazon

The No. 62 pattern takes a different approach from every other bench plane here: the iron sits bevel-up on a low 12 degree bed, with no frog and no separate cap iron. Changing the effective cutting angle is as simple as honing a steeper micro-bevel, which makes one plane cover work that normally needs two.

Specs

  • Brand and model: Stanley Sweetheart 12-137
  • Type: low-angle jack plane, 14 inch sole
  • Bed angle: 12 degrees, bevel-up iron
  • Cutter: 2 inch wide A2 steel iron
  • Body: one-piece base and frog casting with an adjustable throat plate
  • Adjustment: Norris-style adjuster; weight about 6.3 pounds as listed

Who it suits

With a standard bevel the low cutting angle slices end grain cleanly, so this is the plane for shooting boards and trimming mitres. Hone a steeper bevel and it smooths long grain respectably, which makes it a strong single-plane choice for small shops and for flattening glued-up panels.

Honest limitations

Bevel-up planes reward careful honing, because the bevel is the cutting geometry; a sloppy edge changes how the plane behaves. The adjustable throat plate also adds a setup step that bevel-down owners never deal with, and the plane’s weight is noticeable during delicate work.

Stanley Sweetheart No. 9-1/2 Block Plane (12-138)

Check price on Amazon

Every bench needs a plane that fits in one hand and lives within reach, and the 9-1/2 is the standard-angle block plane pattern built for that role. The Sweetheart version adds the line’s thick A2 iron, a ductile iron body and an adjustable mouth to a design usually sold with none of those refinements.

Specs

  • Brand and model: Stanley Sweetheart 12-138
  • Type: standard-angle block plane, 6 inches long
  • Cutter: 1-5/8 inch wide iron, 1/8 inch thick A2 steel, bedded bevel-up at 20 degrees
  • Body: ductile iron, one-piece body and frog
  • Adjustment: adjustable mouth and Norris-style adjuster; weight about 2 pounds as listed

Who it suits

Chamfering edges, flushing dowels and plugs, trimming end grain and easing corners are this plane’s daily work. The adjustable mouth lets you close down for fine finishing cuts or open up for heavier trimming, and the depth adjuster is a real step up from block planes that need the iron tapped into place.

Honest limitations

The standard 20 degree bed is less specialised for pure end-grain work than a low-angle block plane, and reviewers have noted that the mouth does not close quite as tightly as the finest premium rivals. At about 2 pounds it is also heavier than basic block planes, which some users feel during long trimming sessions.

How to choose the right hand plane

Match the plane type to the task. Smoothing planes such as the No. 4 are short, which lets them follow a board’s surface and remove tear-out left by earlier steps. Jack planes are the generalists: long enough to flatten modest panels, short enough to smooth. Jointer planes, longer still, exist to true edges and faces. Block planes are one-handed trimmers, not substitutes for bench planes.

Understand bed angle and bevel direction. Bevel-down bench planes bed the iron at 45 degrees and suit most long-grain work. Bevel-up planes bed the iron at 12 or 20 degrees and add the bevel angle to reach the cutting angle, so swapping or re-honing the iron changes the tool’s character. Low angles excel on end grain; higher effective angles tame figured long grain.

Weigh iron thickness and steel choice. Thick irons flex less and chatter less. O1 and high-carbon steels hone quickly on any stone but dull sooner; A2 holds an edge longer and asks for harder abrasives. Neither is universally better; the right choice depends on how you prefer to sharpen.

Check the mouth and the adjustments. An adjustable mouth or throat plate gives real control over tear-out. Depth and lateral adjustment should feel smooth, not gritty, and a one-piece base and frog casting is a genuine advantage because the iron’s support cannot work loose.

Budget time for setup, whatever you buy. No new plane cuts well straight from the box. The iron needs honing, the sole deserves a flatness check, and the mouth and frog need setting. Treat that first hour as part of the purchase and even the entry-level plane here will take clean shavings.

FAQ

What is the best first hand plane to buy?

A No. 4 smoothing plane or a No. 5 jack plane is the usual starting point. Choose the No. 4 if most of your work is smoothing boards that are already flat, and the jack format if you also need to flatten panels and trim end grain with a shooting board.

What is the difference between bevel-up and bevel-down planes?

Bevel-down planes hold the iron bevel-side down on a frog, usually at 45 degrees, and use a cap iron to control the shaving. Bevel-up planes rest the iron bevel-side up directly on a low bed, and the honed bevel sets the cutting angle, so one body can work at several angles.

Do new hand planes need sharpening before use?

Yes. New irons are ground but rarely honed to a finished edge, and the back of the iron usually needs flattening near the edge before it will take fine shavings. A short session on stones or diamond plates is normal for every plane in this guide.

How do I reduce tear-out in figured wood?

Close the mouth or throat plate so the fibres are supported right up to the edge, take a lighter cut, keep the iron freshly honed, and plane in the direction that the grain rises away from the surface where possible. A thicker iron also helps by resisting the flex that starts chatter.

Final verdict

For most workshops the sensible core is a No. 4 smoother plus a block plane. The Stanley 12-404 covers that pairing’s bench half at the lowest commitment, the Jorgensen adds weight and an adjustable mouth for regular use, and the Sweetheart 12-136 is the upgrade pick when figured wood is a regular problem. Add the No. 62 low-angle jack if end grain and panel flattening dominate your work, and keep the 9-1/2 within arm’s reach for the trimming jobs that appear on every project.

Check price on Amazon

J
JD's Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Hand Planes for Woodworking: 5 Picks for…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.