Key takeaways
- Compare the best wood lathe tool rests for spindle, bowl and hollowing work, with post diameters, rest widths and top edge materials explained clearly.
What's inside
- Quick Answer
- Table of Contents
- Robust Tools Comfort Tool Rest, 12 Inch, Long Post
- Oneway 3037 General Purpose Curved Tool Rest
- Robust Tool Rest for Mini Lathes, 12 Inch, 5/8 Inch Post
- Simple Woodturning Tools Tool Rest Platform with Post and Collar
- MAYAGU Curved Tool Rest for Wood Lathe
- How to Choose a Wood Lathe Tool Rest
- Who Should Skip These Rests
- FAQ
- Final Verdict
- Product and ASIN Reference
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
The tool rest that ships with most wood lathes is the weakest link in the whole setup. Stock rests are usually cast iron with a rough, sloped top edge that grabs at the tool, nicks easily, and forces you to file and wax the surface just to keep a gouge sliding smoothly. An aftermarket rest with a hardened steel top edge fixes that: the tool glides instead of chattering, the edge stays smooth for years, and its profile can be matched to the work: straight for spindles, curved for bowls, flat for scrapers.
This roundup covers five rests that between them suit almost every lathe on the market. Two are premium steel rests from Robust, the benchmark name in this category; the others are Oneway’s long-running curved bowl rest, a flat platform rest for scrapers and hollowing, and a budget curved rest for bowl interiors. Every pick starts with the same two checks: confirm your banjo’s post diameter, then choose the profile that matches the turning you actually do.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The best wood lathe tool rest for most turners is a 12 inch straight rest with a hardened steel top edge on the post diameter your banjo already takes. Bowl turners should add a curved rest that follows the inside wall, and anyone running flat-bottom scrapers or hollowing tools benefits from a wide, flat platform rest instead of a round bar.
Table of Contents
- Robust Tools Comfort Tool Rest, 12 Inch, Long Post
- Oneway 3037 General Purpose Curved Tool Rest
- Robust Tool Rest for Mini Lathes, 12 Inch, 5/8 Inch Post
- Simple Woodturning Tools Tool Rest Platform with Post and Collar
- MAYAGU Curved Tool Rest for Wood Lathe
- How to Choose a Wood Lathe Tool Rest
- Who Should Skip These Rests
- FAQ
- Final Verdict
Robust Tools Comfort Tool Rest, 12 Inch, Long Post
Robust builds its rests around a hardened steel rod welded along the top of a steel body, and the Comfort profile adds a concave curve under that rod so your fingers can curl beneath the bar and guide the tool close to the work. The 12 inch width covers most spindle work and the outside of medium bowls without repositioning the banjo, and the long post suits the taller banjos found on full-size lathes. Because the top rod is hardened, it resists the nicks and dents that make cast iron rests grabby, and it stays slick without filing or waxing.
This is the premium tier pick: a buy-once rest for turners who spend long sessions at a full-size lathe. Check your banjo before ordering, because this version is built on a 1 inch post.
Specs
- Rest width: 12 in
- Post diameter: 1 in, long post
- Top edge: hardened steel rod
- Body: steel, concave comfort profile for finger support
- Best for: spindle work and bowl exteriors on full-size lathes
Oneway 3037 General Purpose Curved Tool Rest
Oneway’s 3037 is the classic curved rest design: a roughly 10 inch curved bar on a 1 inch post, shaped so the rest can follow the inside wall of a bowl while keeping the tool supported close to the cutting edge. The same curve works on the outside of bowls and hollow forms, which is why Oneway sells it as a general purpose rest rather than a specialist interior-only piece. At 5 lb it is a substantial casting-and-steel assembly that sits solidly in the banjo.
If your turning is mostly bowls and you still run the straight rest that came with the lathe, this is the single most useful profile to add. It fits lathes that take a 1 inch post, which covers most mid-size and full-size machines.
Specs
- Model: Oneway 3037
- Profile: curved, general purpose
- Post diameter: 1 in
- Rest length: about 10 in
- Item weight: 5 lb
- Best for: bowl interiors and exteriors, hollow forms
Robust Tool Rest for Mini Lathes, 12 Inch, 5/8 Inch Post
Mini and midi lathes use a 5/8 inch post, and their owners usually get the worst stock rests of all: short, rough castings that make pen and spindle work harder than it should be. This Robust rest brings the same hardened steel top rod as the full-size Comfort rest down to the 5/8 inch post size, in a full 12 inch width that supports long spindles and lets you slide a skew or gouge through a complete pass without moving the banjo.
For turners on lathes like the common 10 and 12 inch mini and midi models, this is the premium upgrade path. Robust’s own selection chart groups its 4 to 12 inch mini rests under lathes with 5/8 inch posts, and this 12 inch version is the widest of that family.
Specs
- Rest width: 12 in
- Post diameter: 5/8 in
- Top edge: hardened steel rod
- Fit: mini and midi lathes with 5/8 in post banjos
- Best for: pens, spindles and small bowls on mini lathes
Simple Woodturning Tools Tool Rest Platform with Post and Collar
Round-bar rests are the wrong shape for flat-bottom tools. Scrapers and the square-shank hollowing tools sold by Simple Woodturning Tools (Harrison Specialties) cut best when the tool body lies flat, and this platform rest gives them that surface: a stainless steel platform 1/2 inch thick and 1.5 inches wide, CNC machined for a smooth, flat top. It was designed for the maker’s Simple Scraper, to reduce tool overhang and vibration during deep hollowing.
The kit includes the flat rest, a 5/8 inch post, a cap screw, a clamping collar that holds your height setting while you swing the banjo, and the hex key to fit them. It is made in the USA and weighs 2 lb. Choose the 7 inch width here for most mid-size work.
Specs
- Platform: stainless steel, 1/2 in thick, 1.5 in wide, 7 in long
- Post diameter: 5/8 in, 4 in long
- Includes: flat rest, post, cap screw, clamping collar, hex key
- Item weight: 2 lb
- Maker: Harrison Specialties, made in the USA
- Best for: scrapers, hollowing tools and other flat-bottom tools
MAYAGU Curved Tool Rest for Wood Lathe
The budget pick is a special-shaped curved rest aimed squarely at bowl interiors. The curved profile lets the rest reach inside a bowl blank so the gouge stays supported near the cut instead of cantilevering over the rim from a straight rest. One useful design detail: the post is threaded, so the rest can be reversed to flip the direction of the curve, which helps when you move between the inside and outside of a form.
The listing data for this rest is thinner than the premium brands publish: post diameter and post length are not stated, so measure your banjo opening and the height from the banjo to centerline before ordering, especially on large-swing lathes where a short post may not reach. Treat it as a budget-tier way to try curved-rest bowl work before committing to a premium brand.
Specs
- Profile: curved, special-shaped for bowl turning
- Post: threaded, rest can be reversed to flip the curve
- Construction: heavy-duty build per the listing
- Post diameter: not stated in published listing data
- Best for: first curved rest for bowl interiors on a budget
How to Choose a Wood Lathe Tool Rest
Start with the post. Tool rest posts come in two common diameters, 5/8 inch on mini and midi lathes and 1 inch on most larger machines, and they are not interchangeable. Some imported lathes use a 25 mm post, which is close to but not the same as 1 inch, so measure your current post with calipers rather than guessing from the lathe’s swing size. Post length matters too: the top of the rest needs to reach center height on your lathe with enough post still inside the banjo to clamp securely.
Next, match the profile to the work. A straight rest is the general-purpose choice for spindles and the outside of bowls. A curved rest follows the wall of a bowl and keeps support close to the cut on interiors. A flat platform rest is the right base for scrapers and square-shank hollowing tools, which need to lie flat rather than balance on a round bar.
Finally, look at the top edge. A hardened steel rod welded to the top is what separates premium rests from stock castings: it resists nicks, stays smooth, and lets the tool glide without the filing and waxing cast iron demands. Width is the last decision. Twelve inches covers most work; shorter rests are easier to position inside small forms, and a set of two lengths covers nearly everything.
Who Should Skip These Rests
Skip this whole category if your stock rest is already a quality steel rest and your turning is occasional spindle work; the upgrade shows most in long sessions and bowl work. Skip the curved rests if you never turn bowls or hollow forms, since a straight rest does everything else. Skip the platform rest if you do not own flat-bottom scrapers or hollowing tools, because gouges and skews are designed to ride a round bar. And skip any rest whose post diameter you have not measured: a rest that almost fits will rock in the banjo, and no top edge quality makes up for that.
FAQ
What post diameter does my lathe need, 5/8 inch or 1 inch?
Most mini and midi lathes take a 5/8 inch post, and most mid-size and full-size lathes take a 1 inch post, but there are exceptions, including imported lathes with 25 mm posts. The only reliable check is to measure the post on the rest you already own, or the bore of the banjo, with calipers before ordering.
Are curved tool rests only for the inside of bowls?
No. A curved rest follows the outside of a bowl as well, and general purpose curved rests like the Oneway 3037 are designed for both. The curve simply keeps the rest close to a rounded workpiece where a straight rest would leave a gap at the ends. Many turners use one curved rest for nearly all their bowl work, inside and out.
Why does a hardened steel top edge matter?
The tool slides along the top edge of the rest on every cut. Soft cast iron nicks when a tool catches, and each nick becomes a bump that disturbs every later pass until it is filed out. A hardened steel rod resists nicking and keeps a smooth, low-friction surface, so the tool moves evenly and the finish off the tool improves.
How close should the tool rest sit to the workpiece?
As close as you can set it without contact, typically a small gap you can check by rotating the workpiece by hand before switching the lathe on. The closer the rest, the less tool overhang beyond it, and the less leverage a catch has. Reposition the rest as the workpiece gets smaller rather than reaching further over the rest.
Final Verdict
For most turners, the Robust Comfort rest in the post size your lathe takes is the best single upgrade: the hardened top rod and 12 inch width improve every cut, every session. Bowl turners should pair it with a curved rest, the Oneway 3037 on 1 inch post lathes or the budget MAYAGU if you want to try the profile first. Mini lathe owners get the same Robust top edge in the 5/8 inch mini rest, and scraper and hollowing-tool users should add the Simple Woodturning Tools platform, the only flat rest in this roundup. Measure your post first, and any of these five will outlast the lathe it is fitted to.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| Robust Tools Comfort Tool Rest, 12 Inch, Long Post | B00E63OXYQ |
| Oneway 3037 General Purpose Curved Tool Rest | B005ELX3EU |
| Robust Tool Rest for Mini Lathes, 12 Inch, 5/8 Inch Post | B004DIHN0U |
| Simple Woodturning Tools Tool Rest Platform with Post and Collar | B0D4656BM6 |
| MAYAGU Curved Tool Rest for Wood Lathe | B07S9VLC5P |
Related guides
You might also like
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




