Updated Nov 20, 2026· 8 min read

Our Top Picks

  1. DEWALT Thickness PlanerOne Size24.25 x 1 x 20.6 inches102 Pounds
    Check on Amazon
  2. WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness PlanerSpiral, 13-Inch, Single Speed81 pounds
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is DEWALT DW735X 13-Inch Three-Knife Planer, with JET JWP-13BT 13-Inch Helical-Style Planer as a strong alternative.

A 13-inch benchtop planer is the widest portable thickness planer most home shops can fit, and that extra half inch over a 12.5-inch machine matters: it swallows standard 12-inch shelving stock, most glue-ups, and the wide boards that come off a typical resaw or lumber rack without a second setup. Every machine in this class runs a 15-amp-class motor on a normal shop circuit, so the real differences are the cutterhead, the feed system, and how each maker handles chips and snipe.

This guide compares five 13-inch benchtop planers sold on Amazon, from a three-knife two-speed workhorse to helical and spiral insert heads, using only published manufacturer specifications: planing capacity, cutterhead layout, feed rates, depth controls, dust ports, and weight.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • Quick Answer
  • DEWALT DW735X 13-Inch Three-Knife Planer
  • JET JWP-13BT 13-Inch Helical-Style Planer
  • Grizzly G0940 13-Inch Helical Planer
  • WEN PL1326 13-Inch Spiral Planer
  • Delta 22-555 13-Inch Portable Planer
  • How to Choose
  • Who Should Skip
  • FAQ
  • Final Verdict
  • Product and ASIN Reference

Quick Answer

The DEWALT DW735X is the safest all-around choice, with a three-knife head, two feed speeds, and fan-assisted chip ejection. For a spiral head on a mid-range budget, pick the WEN PL1326. For the quietest cut and least tear-out, the Grizzly G0940 and JET JWP-13BT use indexable carbide inserts instead of full-width knives.

DEWALT DW735X 13-Inch Three-Knife Planer

DEWALT DW735X 13-Inch Three-Knife Two-Speed Thickness Planer

DEWALT DW735X 13-Inch Three-Knife Two-Speed Thickness Planer

Check price on Amazon

The DW735X is the reference point in this class: a three-knife cutterhead, a two-speed gearbox, and a fan-assisted chip ejection system that pulls chips away from the head instead of relying only on an external collector. The two feed speeds let you run stock fast for dimensioning at 96 cuts per inch, then slow the feed to 179 cuts per inch for a finishing pass that needs less sanding. A turret depth stop returns to preset thicknesses repeatably, and the material removal gauge shows how much each pass will take before you commit.

Specs:

  • Motor: 15 amp, 20,000 RPM motor speed
  • Cutterhead: three knives, 10,000 RPM
  • Capacity: 13 inches wide, 6 inches thick
  • Feed speeds: two, 96 and 179 cuts per inch
  • Maximum depth of cut: 1/8 inch per pass
  • Chip ejection: fan-assisted, with dust hose adapter included in the X package
  • Weight: 92 pounds
  • Tier: premium

JET JWP-13BT 13-Inch Helical-Style Planer

JET JWP-13BT 13-Inch Benchtop Planer, Helical Style (722130)

JET JWP-13BT 13-Inch Benchtop Planer, Helical Style (722130)

Check price on Amazon

JET’s JWP-13BT (stock number 722130) pairs a 2 HP motor with a helical-style cutterhead loaded with indexable carbide inserts, so a dull or nicked edge is a quick rotation of one small insert rather than a full knife change. It offers two feed rates, 18 and 26 feet per minute, so rough stock can move quickly and finish passes can slow down. Because the inserts cut in a shearing pattern, the published design aims at lower noise and less tear-out on figured grain than straight knives of the same width.

Specs:

  • Motor: 2 HP, 120V single phase
  • Cutterhead: helical-style, indexable carbide inserts
  • Capacity: 13 inches wide, 6 inches thick
  • Feed speeds: two, 18 and 26 FPM
  • Model: JWP-13BT, stock number 722130
  • Tier: premium

Grizzly G0940 13-Inch Helical Planer

Grizzly G0940 13-Inch Benchtop Planer with Helical Cutterhead

Grizzly G0940 13-Inch Benchtop Planer with Helical Cutterhead

Check price on Amazon

The Grizzly G0940 is a true helical machine in a benchtop frame: four rows of indexable inserts, 30 in total, set at a shear angle around the head. Its 2 HP motor turns the cutterhead at 8,500 RPM and feeds stock at 25 feet per minute. Dual dust ports, 2-inch and 4-inch, make it easy to connect either a shop vacuum or a full dust collector without adapters. At roughly 82 pounds it is heavy for a portable, but that mass works in its favor on the bench, damping vibration during wide cuts.

Specs:

  • Motor: 2 HP, 120V single phase
  • Cutterhead: helical, 30 indexable inserts
  • Cutterhead speed: 8,500 RPM
  • Capacity: 13 inches wide, 6 inches thick
  • Feed rate: 25 FPM
  • Dust ports: 2-inch and 4-inch
  • Weight: about 82 pounds
  • Tier: premium

WEN PL1326 13-Inch Spiral Planer

WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer

WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer

Check price on Amazon

The PL1326 is the mid-range way into insert tooling: a spiral cutterhead carrying 26 staggered, rotatable high-speed steel blades in a cast-iron base. The 15-amp motor spins the head at 10,000 RPM with a single 26 FPM feed rate. WEN includes a depth stop for repeatable final thicknesses and an adjustable dust port that can be aimed at your hose run. The HSS inserts will not hold an edge as long as carbide, but they are inexpensive to rotate and replace, and the spiral layout still cuts quieter than the straight-knife machines in this roundup.

Specs:

  • Motor: 15 amp
  • Cutterhead: spiral, 26 rotatable HSS inserts
  • Cutterhead speed: 10,000 RPM
  • Capacity: 13 inches wide, 6 inches thick
  • Feed rate: 26 FPM, single speed
  • Base: cast iron
  • Included: depth stop, adjustable dust port
  • Weight: about 81 pounds
  • Tier: mid-range

Delta 22-555 13-Inch Portable Planer

Delta 22-555 13-Inch Portable Thickness Planer

Delta 22-555 13-Inch Portable Thickness Planer

Check price on Amazon

The Delta 22-555 is the budget straight-knife option: a 15-amp motor, a two-knife cutterhead, and the fastest feed rate in this group at 28 FPM. Its standout feature is a cutterhead lock that clamps the head before a pass, a design intended to limit the snipe that portable planers can leave at board ends. Two-knife heads are simple and the knives are widely available, but each pass takes a bigger bite per knife, so finish passes should be shallow. For shops that mostly dimension construction lumber and paint-grade stock, it covers the basics for the least commitment.

Specs:

  • Motor: 15 amp
  • Cutterhead: two knives
  • Capacity: 13 inches wide, 6 inches thick
  • Feed rate: 28 FPM
  • Maximum depth of cut: 3/32 inch per pass
  • Feature: cutterhead lock for snipe control
  • Tier: budget

How to Choose

Start with the cutterhead. Straight knives (the DEWALT and the Delta) are simple, cheap to replace, and leave an excellent finish in straight-grained stock, but they are loud and can tear out figured grain. Spiral and helical heads (the WEN, Grizzly, and JET) cut with small inserts at a shear angle, which published testing consistently links to lower noise and less tear-out; when one edge dulls or nicks, you rotate a single insert instead of changing a full knife set. Carbide inserts, on the Grizzly and JET, hold an edge longer than the WEN’s HSS inserts.

Next, look at feed speeds. A two-speed gearbox, on the DEWALT and JET, lets you trade speed for finish: fast for rough dimensioning, slow for a final pass. Single-speed machines around 25 to 28 FPM are fine if you are willing to take shallower final cuts. Then confirm capacity and support: all five machines here plane 13 inches wide and 6 inches thick, but long or heavy boards still need infeed and outfeed support to control snipe, and a cutterhead lock or a turret depth stop helps repeatability. Finally, match the dust port to your collection: planers produce a high volume of chips, so a 4-inch port into a dust collector, or fan-assisted ejection like the DEWALT’s, keeps the cutterhead clear and the cut consistent.

Who Should Skip

Skip the whole 13-inch class if your stock routinely runs wider than 13 inches, such as large tabletop glue-ups; a 15-inch or wider stationary planer, or a drum sander, fits that work better. Skip the insert-head machines if you want the lowest possible running costs and mostly plane softwoods, since a straight-knife planer is cheaper to keep in knives. Skip any benchtop planer if you have no dust collection at all and no way to add it, because these machines eject a large volume of chips by design. And if your boards start out twisted or cupped, remember that no thickness planer flattens stock on its own; you still need a jointer, a planer sled, or hand work to establish one flat face first.

FAQ

Is a 13-inch planer much better than a 12.5-inch planer?

The half inch sounds minor, but it decides whether common 12-inch-wide boards and shelving stock pass through with clearance on both sides. If most of your lumber is under 12 inches wide, a 12.5-inch machine is enough; if you buy wide rough stock, the 13-inch class saves real time.

Are helical and spiral cutterheads worth it in a benchtop planer?

Based on their published designs, they cut quieter and tear out less on figured grain, and insert rotation replaces full knife changes. They make the most sense if you plane a lot of hardwood or reversing grain. For mostly softwood and paint-grade work, a three-knife head like the DEWALT’s is hard to fault.

How do I reduce snipe on a benchtop planer?

Use level infeed and outfeed support so the board stays flat through the cut, take shallow finishing passes, and feed boards back to back on long runs. A cutterhead lock, like the Delta’s, and a slow finishing feed speed, like the DEWALT’s 179 CPI setting, are both designed to help.

What dust collection does a 13-inch planer need?

At minimum, a strong shop vacuum on the dust port; a dedicated dust collector on a 4-inch port handles the chip volume better. Fan-assisted ejection, as on the DW735X, helps move chips, but it still needs somewhere to go, so plan the hose run before the first board.

Final Verdict

For most woodworkers, the DEWALT DW735X remains the default 13-inch benchtop planer: two feed speeds, a three-knife head, and fan-assisted chip ejection cover the widest range of work. Choose the JET JWP-13BT or Grizzly G0940 if carbide insert tooling, quieter cutting, and easy edge maintenance top your list, and the WEN PL1326 if you want that insert-head behavior at a mid-range tier. The Delta 22-555 is the budget pick for straightforward dimensioning, with a cutterhead lock that addresses the class’s most common complaint.

J
JD's Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best 13-Inch Benchtop Planers for Woodworking ShopsCheck price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.