Key takeaways
- Compare the best Japanese hand saw sets for beginners, from a made-in-Japan KAKURI mini kit in a canvas roll to budget ryoba and flush cut pairs.
What's inside
- Quick Answer
- Table of Contents
- 1. KAKURI Mini Japanese Saw Set, 4-Piece
- 2. Magicbox Japanese Hand Saw Set, 4-Piece
- 3. Evertools Japanese Hand Saw Set, 3-Piece
- 4. Gulfmew Japanese Pull Saw Set, 2-Pack
- 5. EXTYQWC Japanese Pull Saw, 2-Pack
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
- Product and ASIN Reference
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Japanese hand saws cut on the pull stroke instead of the push stroke, and that one difference shapes everything about them. Because the blade is pulled taut rather than pushed into the cut, it can be made much thinner than a Western saw blade, so it removes a narrower kerf, tracks straighter with less effort, and leaves a cleaner edge on joinery parts. For a beginner, the light, controlled pull stroke is easier to learn than muscling a push saw through a board.
Buying the saws as a set is the simplest way to cover the basic cuts in one purchase. A typical starter set combines a double-edged ryoba for rip and crosscuts, a backed dozuki for dovetails and tenons, a flexible flush cut saw for trimming dowels and pegs, and sometimes a small keyhole saw for curves and cutouts. The five sets below range from a made-in-Japan mini kit in a canvas roll to simple two-packs, and each one gives a new woodworker a complete, matched starting point.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
A Japanese hand saw set gives a beginner the four basic cuts — rip, crosscut, flush and fine joinery — in one purchase. The KAKURI Mini 4-Piece set is the most complete starter kit here, with a ryoba, flush cut, dozuki and keyhole saw in a canvas roll. The Magicbox 4-piece and Gulfmew 2-pack cover the same basics at a budget tier.
Table of Contents
- Quick Answer
-
- KAKURI Mini Japanese Saw Set, 4-Piece
-
- Magicbox Japanese Hand Saw Set, 4-Piece
-
- Evertools Japanese Hand Saw Set, 3-Piece
-
- Gulfmew Japanese Pull Saw Set, 2-Pack
-
- EXTYQWC Japanese Pull Saw, 2-Pack
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
- Product and ASIN Reference
1. KAKURI Mini Japanese Saw Set, 4-Piece
The KAKURI Mini set is the most complete beginner kit in this roundup. It packs four small saws into a heavy-duty canvas roll: a ryoba for rip and crosscuts, a flush cut saw for trimming dowels and pegs, a dozuki for dovetails and fine joinery, and a short keyhole saw for curves and starter holes. The blades are SK-5 Japanese carbon steel, the handles are beech wood with brass rivets, and the whole kit is made in Japan. The flush cut and dovetail saws carry fine teeth suited to detail work, and the compact 5-inch blades are easy for a first-time user to control on boxes, small furniture parts and fine detail projects.
Specs:
- Pieces: 4 saws (ryoba, flush cut, dozuki, keyhole)
- Blade lengths: 5 in (ryoba, flush cut, dozuki), 3 in (keyhole)
- Blade steel: SK-5 Japanese carbon steel
- Handles: beech wood with brass rivets
- Storage: number 8 canvas roll, 11.2 x 5.3 x 0.9 in rolled
- Origin: made in Japan
Best for: beginners who want one quality kit that covers joinery and detail work, and anyone short on storage space. This is the premium pick of the five.
2. Magicbox Japanese Hand Saw Set, 4-Piece
The Magicbox set covers the same four jobs with four full pull saws instead of minis. It holds a large double-edge pull saw, a compact double-edge pull saw, a flush cut saw and a pointed hand saw for detail work and starting cuts in tight spots. The double-edge saws carry 11 TPI teeth on one edge and 17 TPI teeth on the other, so one blade handles both rip and crosscut work. Blades are SK5 spring steel with triple-ground teeth, each saw has a wooden handle, and blade guards are included for storage. The listing rates the set for hardwood, softwood, bamboo, plywood and MDF, which makes it a flexible first kit for furniture and trim projects.
Specs:
- Pieces: 4 saws (large double-edge, compact double-edge, flush cut, pointed detail saw)
- Teeth: 11/17 TPI double edges, triple-ground
- Blade steel: SK5 spring steel
- Handles: wood, with blade guards included
- Materials listed: hardwood, softwood, bamboo, plywood, MDF, PVC trim
Best for: beginners who want full-size saws and the widest material range at a mid-range tier.
3. Evertools Japanese Hand Saw Set, 3-Piece
The Evertools set takes a simpler three-saw approach with longer blades. A 6-inch double-edged ryoba covers rip cuts on one edge and crosscuts on the other, a 6-inch flush cut saw trims dowels, plugs and tenons level with the surface, and an 8-inch pruning blade handles rough stock and green branches that would be hard on fine joinery teeth. All three blades are SK5 steel. The pruning blade is the unusual member of the set: it is less about furniture joinery and more about giving a beginner one saw that can leave the bench and handle coarse outdoor cuts.
Specs:
- Pieces: 3 saws (ryoba, flush cut, pruning)
- Blade lengths: 6 in (ryoba), 6 in (flush cut), 8 in (pruning)
- Blade steel: SK5 steel
- Ryoba: double-edged, one edge for rip cuts and one edge for crosscuts
Best for: beginners who want longer blades and a set that doubles for shop and yard work, at a mid-range tier.
4. Gulfmew Japanese Pull Saw Set, 2-Pack
The Gulfmew 2-pack strips the idea down to the two saws a beginner uses most. The double-edged ryoba has an 11 TPI edge for rip cuts and a 17 TPI edge for crosscuts, and the 6-inch flush cut saw handles dowels, pegs and protruding tenons. Both blades are SK5 steel with triple-ground teeth, and the wooden handles have an anti-slip grip shape. The listing also rates the pair for plywood and bamboo alongside solid wood. There is no dozuki for fine dovetails, so this is a starter pair for learning the pull stroke on general projects rather than a full joinery kit.
Specs:
- Pieces: 2 saws (double-edged ryoba, flush cut)
- Teeth: ryoba 11 TPI rip edge and 17 TPI crosscut edge, triple-ground
- Blade steel: SK5 steel
- Handles: wood, anti-slip grip
- Materials listed: solid wood, plywood, bamboo
Best for: a budget-tier first purchase and learning pull-saw technique on boxes, shelves and trim.
5. EXTYQWC Japanese Pull Saw, 2-Pack
The EXTYQWC pack takes a different route: two identical 6-inch double-edge pull saws instead of two different tools. Each saw pairs an 11 TPI edge with a 17 TPI edge, so the same saw rips and crosscuts, and the second saw works as a spare for a second bench, a toolbox or a helper. The SK5 high-carbon steel blades have triple-ground teeth hardened to HRC 60-63. For a beginner who expects to bend a blade while learning, which is the most common first-year accident with thin pull saws, a built-in spare is a practical feature rather than a compromise.
Specs:
- Pieces: 2 identical double-edge pull saws
- Blade length: 6 in each
- Teeth: 11 TPI and 17 TPI edges, triple-ground
- Blade steel: SK5 high-carbon steel, teeth hardened to HRC 60-63
Best for: beginners who want a backup blade from day one, shared shops and anyone teaching a second person.
How to Choose
Start with the cuts, not the piece count
List the cuts a first year of projects actually needs: sizing boards (rip and crosscut), one fine joinery cut for boxes or frames (dozuki), and cleanup (flush cut). A set that covers those four jobs, like the KAKURI Mini or the Magicbox, is a complete starter kit. Two-packs cover the sizing and cleanup cuts and leave fine joinery for a later single-saw purchase.
Match the teeth to the work
Teeth per inch, or TPI, decides how a saw behaves. Coarse edges around 11 TPI remove stock quickly on rip cuts, mid-range edges around 17 TPI crosscut cleanly, and fine dozuki teeth leave the smoothest joinery surfaces. Double-edged ryoba blades put a rip edge and a crosscut edge on one blade, which is why they anchor almost every set here.
Decide between mini and full-size blades
Mini sets use blades around 5 inches. They are light, precise and easy to control on small parts, but the short stroke slows down long boards. Full-size sets with 6-inch and longer blades size shelf and furniture parts faster. Pick based on the projects planned for the first year, not on the biggest board that might come along someday.
Check storage and blade protection
Thin Japanese blades bend if they rattle loose in a toolbox. A canvas roll, like the KAKURI case, or included blade guards, like the Magicbox set carries, keep teeth separated and protected between projects. If a set ships with neither, plan a simple wrap or rack for storage.
Who Should Skip
- Woodworkers who already own a good ryoba and dozuki: a set duplicates the saws already on the rack, and single specialty saws are the better next purchase.
- Framing and deck builders: these thin blades are made for furniture-size stock, not for fast cuts through construction lumber all day.
- Anyone who wants resharpenable teeth: most Japanese saw blades in this class use hardened, disposable blades that are replaced rather than filed.
- Power-tool-only shops: if every sizing cut happens on a table saw and no hand joinery is planned, a set will sit unused.
FAQ
Are Japanese pull saws a good first hand saw for beginners?
Yes. The pull stroke keeps the thin blade in tension, so the saw tracks a line with light pressure and little tendency to wander or buckle. Most beginners find the stroke easier to control than a push saw, and the narrow kerf means less wood removed and less effort per cut.
What is the difference between a ryoba and a dozuki?
A ryoba has teeth on both edges of an unsupported blade, one edge for rip cuts and one for crosscuts, and it cuts through the full thickness of a board. A dozuki has a stiff metal back along one edge, which limits cut depth but keeps the very thin blade straight for precise joinery like dovetails and tenon shoulders.
Can one of these sets handle a first furniture project?
For small and medium pieces, yes. A set with a ryoba, a dozuki and a flush cut saw covers sizing parts, cutting simple joinery and trimming pegs or tenons flush on projects like boxes, stools, small shelves and picture frames. Large tabletops and long rip cuts are slower by hand, but the tools themselves are capable.
How do I stop a thin pull saw blade from bending or kinking?
Let the teeth do the work and pull with light, even pressure, keeping the blade in line with the cut. Twisting the saw mid-stroke or forcing a stalled blade is what kinks thin steel. Start cuts with a few short backstrokes to establish a groove, and store blades in a roll or guard so the teeth are not damaged between uses.
Final Verdict
For most beginners, the KAKURI Mini 4-Piece set is the buy: four matched saws, real joinery coverage and a canvas roll, all made in Japan. The Magicbox 4-piece is the mid-range alternative with full-size saws and the widest material list. On a budget tier, the Gulfmew pair covers the essential ryoba and flush cut pairing, the Evertools trio adds longer blades and outdoor range, and the EXTYQWC twin pack builds in a spare for the learning curve.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| KAKURI Mini Japanese Saw Set, 4-Piece | B0DJQMYGBH |
| Magicbox Japanese Hand Saw Set, 4-Piece | B0H82KYJ16 |
| Evertools Japanese Hand Saw Set, 3-Piece | B0FC2GCZJ6 |
| Gulfmew Japanese Pull Saw Set, 2-Pack | B0GSVC7Z1X |
| EXTYQWC Japanese Pull Saw, 2-Pack | B0GCC86C5W |
Related guides
You might also like
- Best Table Saw Blades: How to Choose the Right One
- Best Pipe Clamps: Buyer’s Guide for Woodworkers
- Best Dado Blade Sets for Table Saws: Buyer’s Guide
- Best Circular Saw Blades: Types, Teeth, and Fit Explained
- Best Hexagon Garage Lights for Workshops: 5 Top Picks
- Best Safety Glasses for Woodworking: 5 Clear Picks
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




