Key takeaways
- Compare the best dovetail saws for hand-cut joinery, from fine Japanese dozuki pull saws to a classic brass-back tenon saw, with specs and buying tips.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
The best dovetail saw for most hand-tool woodworkers is a fine-toothed dozuki or backsaw with a stiffened blade, a thin kerf, and teeth fine enough to start cleanly on a knife line. For a dedicated rip-filed dovetail saw, the Gyokucho 372 is the standout pick here: its thin plate and rip teeth are made for cutting tails and pins along the grain. If you prefer a Western push saw, the Spear & Jackson brass-back tenon saw covers dovetails and tenon work with one tool. The SUIZAN dozuki saws in 6-inch and 8-inch sizes suit smaller boxes and drawers, and the Gyokucho 370 is a longer 240 mm option for wider boards.
As an Amazon Associate, we earn from qualifying purchases.
Every saw below is a real, currently listed hand saw sold for joinery work. The sections that follow explain what separates them — tooth pitch, plate thickness, kerf, depth of cut, and handle style — and how to match a saw to your work.
Table of Contents
- Quick Picks
- 1. Gyokucho 372 Rip Dozuki Saw
- 2. Gyokucho Dozuki 370 (240 mm)
- 3. SUIZAN Dozuki Dovetail Saw 8 Inch
- 4. SUIZAN Dozuki Dovetail Saw 6 Inch
- 5. Spear & Jackson Traditional Tenon Saw 12 Inch
- How to Choose a Dovetail Saw
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks
- Best overall for dovetails: Gyokucho 372 Rip Dozuki — rip-filed teeth and the thinnest kerf here.
- Best for wider boards: Gyokucho Dozuki 370 — a full 240 mm blade for longer, steadier strokes.
- Best fine crosscut dozuki: SUIZAN Dozuki 8 Inch — an ultra-thin 0.008 inch blade for fine lines.
- Best budget pick: SUIZAN Dozuki 6 Inch — a compact, replaceable-blade saw for boxes and drawers.
- Best Western push saw: Spear & Jackson Tenon Saw — a brass-back 12 inch saw for dovetails and tenons.
1. Gyokucho 372 Rip Dozuki Saw
The Gyokucho 372 is the only saw in this roundup filed specifically for rip cuts, which is exactly the cut a dovetail joint demands: tails and pins are sawn along the grain, so rip teeth shear the fibers instead of slicing across them. Its plate is about 0.3 mm thick, giving a kerf of roughly 0.018 inch, thin enough to split a knife line without leaving a sloppy socket wall. The blade is backed by a steel spine, and its depth of cut tapers from about 1-3/4 inches at the heel to about 2-1/4 inches at the toe, so it handles common furniture thicknesses.
The teeth are impulse-hardened, so they hold an edge far longer than conventionally hardened teeth, though they cannot be resharpened once they dull. Instead, the blade unbolts and swaps for a fresh replacement. The handle is wood wrapped in rattan cane, and at roughly 8-1/4 ounces the saw is light enough that its own weight does most of the work on the pull stroke.
This is a mid-range saw that behaves like a specialist. Choose it if dovetails are the main job, especially in hardwoods. Skip it if you mostly cut tenon shoulders across the grain, or prefer a Western push saw.
Specs
- Blade length: 9.5 inches (240 mm)
- Tooth pattern: rip, about 19 to 20 teeth per inch
- Plate thickness: about 0.3 mm (0.012 inch)
- Kerf: about 0.018 inch
- Depth of cut: about 1-3/4 inches at the heel, 2-1/4 inches at the toe
- Teeth: impulse-hardened, not resharpenable
- Blade: replaceable, single-bolt fitting
- Handle: wood with rattan cane wrap
- Weight: about 8-1/4 ounces
- Overall length: about 23-7/8 inches
2. Gyokucho Dozuki 370 (240 mm)
The Gyokucho 370 is the company’s classic 240 mm dozuki, a crosscut-filed pull saw with a rigid back and a replaceable blade. Where the 372 is a rip specialist, the 370 uses finer crosscut-style teeth, which suits tenon shoulders, dovetail baselines, and other cuts across the grain where a clean, square shoulder matters more than speed along the grain.
Like other Razorsaw models, the 370 has impulse-hardened teeth and a detachable blade, so a dulled edge is a blade swap rather than the end of the tool. Its 240 mm blade also gives a longer stroke than the compact saws below, which helps keep cuts straight on wider boards.
Pick the 370 if you want one Japanese saw that leans toward crosscut joinery, or as the crosscut half of a two-saw dovetail kit. It sits in the mid-range tier. If your work is almost entirely tails and pins in thick hardwood, the rip-filed 372 will cut faster along the grain.
Specs
- Blade length: 240 mm (about 9.4 inches)
- Tooth pattern: fine crosscut, about 21 teeth per inch
- Blade style: backed dozuki plate with rigid spine
- Teeth: impulse-hardened, not resharpenable
- Blade: replaceable
- Handle: traditional straight grip
- Model number: 370
- Manufacturer: Gyokucho Sangyo (Razorsaw)
3. SUIZAN Dozuki Dovetail Saw 8 Inch
SUIZAN’s 8-inch dozuki is built around an unusually thin blade: the listing specifies a 0.008 inch blade, thinner than the 0.012 inch plates on most saws here, paired with fine crosscut teeth at about 30 teeth per inch. That combination is aimed at very fine work — small boxes and dovetails in thin stock where even a standard dozuki kerf feels wide. The steel back keeps the thin plate from flexing so the cut tracks the line instead of wandering.
The blade is Japanese steel, and like the other Japanese saws here it cuts on the pull stroke, which keeps the thin plate in tension and under control. The teeth are impulse-hardened, so when the edge goes, the blade is replaced rather than resharpened. At 210 mm, the blade sits between the compact 6-inch SUIZAN and the 240 mm Gyokucho saws — a useful middle ground for drawer work.
This is a mid-range, fine-work specialist for dovetails in stock around 1/2 inch thick or less. Skip it for thick, heavy hardwood tails, where the coarser rip teeth of the Gyokucho 372 remove waste faster.
Specs
- Blade length: 8 inches (210 mm)
- Tooth pattern: crosscut, about 30 teeth per inch
- Blade thickness: 0.008 inch
- Blade material: Japanese steel
- Back: steel spine
- Blade: replaceable
- Item model number: D-002
- Manufacturer: SUIZAN
4. SUIZAN Dozuki Dovetail Saw 6 Inch
The 6-inch SUIZAN dozuki is the budget-friendly entry point in this roundup and one of the most popular first Japanese saws for joinery. Its 150 mm blade carries 25 teeth per inch in a crosscut pattern, with a 0.012 inch plate and a kerf of about 0.02 inch — fine enough for clean dovetail sockets in small work, and forgiving for a beginner learning to saw to a line. A carbon steel spine keeps the blade straight, and the wooden handle is wrapped in vinyl rattan and fixed with a wingnut, so the blade swaps out by hand when it dulls.
At about 5.47 ounces and roughly 15.16 inches overall, it is a light, compact tool that stores easily in a tool roll or drawer. The short blade limits stroke length, which is fine for boxes, picture frames, small drawers, and trim, but it will feel slow on wide carcass sides.
Choose the 6-inch SUIZAN if you are cutting your first dovetails, work mostly at small scale, or want a low-commitment way to try the pull-saw method. If you regularly cut dovetails in boards wider than about 6 inches, step up to one of the 240 mm saws above for the longer stroke.
Specs
- Blade length: 6 inches (150 mm)
- Tooth pattern: crosscut, 25 teeth per inch
- Blade thickness: 0.012 inch (0.3 mm)
- Kerf: about 0.02 inch (0.5 mm)
- Back: carbon steel spine
- Handle: wood with vinyl rattan wrap, wingnut fitting
- Blade: replaceable
- Weight: about 5.47 ounces (155 g)
- Overall length: about 15.16 inches
5. Spear & Jackson Traditional Tenon Saw 12 Inch
The Spear & Jackson tenon saw is the Western counterpoint to the four Japanese pull saws above. It cuts on the push stroke, with a 12-inch high-carbon steel blade stiffened by a solid brass back and a traditional wooden handle. At 15 teeth per inch with a universal tooth pattern, it handles both rip and crosscut work, so the same saw that cuts dovetail tails can also saw tenon cheeks and shoulders — the reason tenon saws have been the default joinery saw in Western shops for generations.
The brass back adds useful weight, letting the saw settle into the cut without downward pressure, and the plate is resharpenable with a saw file, unlike the impulse-hardened Japanese blades — so it is a saw you maintain rather than re-blade. The 12-inch blade and deeper cut under the back also suit larger work than the dozuki saws here, including tenons on table and chair parts.
This is a budget to mid-range saw and the most versatile single purchase in the roundup. Choose it if you want one backsaw for dovetails, tenons, and general bench work. Choose a dozuki instead if your work is mostly fine dovetails in thin stock, where the thinner Japanese kerf leaves less cleanup.
Specs
- Blade length: 12 inches
- Tooth pattern: universal (rip and crosscut), 15 teeth per inch
- Blade material: high-carbon steel
- Back: solid brass
- Stroke: push
- Teeth: resharpenable with a saw file
- Handle: traditional wood, riveted
- Intended work: tenons, dovetails, and general joinery
How to Choose a Dovetail Saw
Decide on a cutting style first. Japanese dozuki saws cut on the pull stroke with very thin, spine-backed blades and fine teeth. They start easily, track a line with little effort, and leave a narrow kerf, but the impulse-hardened teeth cannot be resharpened — the blade is replaced instead. Western backsaws cut on the push stroke with thicker plates and brass or steel backs; they feel familiar to anyone raised on Western tools and can be resharpened for decades.
Match the tooth filing to the cut. Dovetail tails and pins are rip cuts, so a rip-filed saw like the Gyokucho 372 cuts them fastest. Crosscut-filed dozuki saws still cut dovetails well, especially in thinner stock, and they are better for tenon shoulders and baselines. A universal pattern splits the difference for mixed work.
Mind the tooth count and kerf. Finer teeth — 25 to 30 per inch — leave smoother walls and start more gently, but cut slowly in thick stock. Coarser teeth around 15 to 20 per inch suit general furniture work. A thinner kerf wastes less wood and needs less effort, though a very narrow kerf leaves little room to steer, so beginners often track better with a mid-fine saw.
Check depth of cut and blade length. The spine of a backsaw or dozuki limits how deep it can cut; make sure the depth under the back exceeds your stock thickness with room to spare. Longer blades give longer, straighter strokes on wide boards; short blades are easier to control on small boxes.
Consider upkeep. If you would rather swap a blade than learn saw sharpening, choose a replaceable-blade Japanese saw. If you enjoy maintaining edge tools, a resharpenable Western backsaw can last a career.
FAQ
Is a rip or crosscut saw better for dovetails?
Rip filing is the traditional choice because tails and pins are cut along the grain, and rip teeth remove that waste faster. Crosscut-filed dozuki saws still produce clean dovetails, particularly in stock under about 3/4 inch thick, and they double as shoulder saws. Many woodworkers eventually own one of each.
Can a tenon saw be used as a dovetail saw?
Yes. A tenon saw is simply a larger backsaw, and a fine one like the 15-tooth Spear & Jackson in this roundup cuts dovetails accurately. Its extra blade length and depth of cut help on bigger work, though a smaller dovetail saw or dozuki is easier to control on small drawers and boxes.
Do Japanese dozuki blades need sharpening?
No. Dozuki teeth are impulse-hardened, which makes them too hard for a standard saw file. When the edge dulls, the blade is unbolted and replaced with a new one. That trade-off is why these saws stay inexpensive to keep sharp despite the fine teeth.
What size dovetail saw should a beginner start with?
A mid-fine saw with a blade between 6 and 9.5 inches and roughly 20 to 25 teeth per inch is the easiest starting point. The SUIZAN 6-inch dozuki is the budget-friendly option here, while the Gyokucho 372 adds rip filing and a longer blade for furniture-scale work.
Conclusion
For hand-cut dovetails, the Gyokucho 372 is the most purpose-built saw in this roundup: rip teeth, a very thin kerf, and a replaceable blade in a mid-range package. The Gyokucho 370 covers crosscut joinery with the same replaceable-blade convenience, the two SUIZAN dozuki saws scale the idea down for fine and small work, and the Spear & Jackson tenon saw serves woodworkers who want one resharpenable Western backsaw for dovetails and tenons alike. Match the filing to your cuts and the blade length to your boards, and any of these five will saw clean, accurate joints.
Related guides
You might also like
- 5 Best Mortise Chisels for Hand-Cut Joinery in 2026
- Best Tenon Saws: 5 Picks for Clean, Accurate Joinery
- Best Hand Planes for Woodworking: 5 Picks for Every Bench
- Best Zero Clearance Inserts for Table Saws: 5 Top Picks
- Best Sharpening Stones for Chisels, Planes and Knives
- Best Featherboards for Table Saw and Router Table Cuts
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.