Key takeaways
- Compare the best hand saws for woodworking, from fine-finish panel saws to Japanese pull saws, with blade lengths, tooth counts and handle specs.
What's inside
- Quick Answer
- Table of Contents
- STANLEY FATMAX Hand Saw, 15-Inch (20-045)
- STANLEY SharpTooth Finish Cut Hand Saw, 15-Inch (20-526)
- IRWIN Tools Universal Handsaw, 20-Inch (1773466)
- SUIZAN Ryoba Double Edge Saw, 9.5-Inch (SR-001)
- Gyokucho Razorsaw Ryoba 770-3600
- How to Choose a Hand Saw for Woodworking
- Who Should Skip These Saws
- FAQ
- Final Verdict
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
- Top Pick: STANLEY FATMAX Hand Saw, 15-Inch (20-045)
- Runner-up: STANLEY SharpTooth Finish Cut Hand Saw, 15-Inch (20-526)
- Also consider: IRWIN Tools Universal Handsaw, 20-Inch (1773466)
The best hand saw for most woodworking shops is the STANLEY FATMAX 15-inch (20-045), because its SharpTooth tooth geometry, induction-hardened teeth and thicker-than-standard blade cover the crosscuts and rip cuts that make up most bench work. Woodworkers who want a finer finish should look at the STANLEY SharpTooth 20-526, and anyone curious about pull-stroke cutting should look at the SUIZAN Ryoba or the Gyokucho Razorsaw 770-3600.
A general-purpose hand saw is the tool that handles everything the specialized saws on this site do not: breaking down boards to rough length, trimming stock at the bench, and making the occasional cut where setting up a power saw takes longer than the cut itself. The five saws below split into two camps. Three are Western push saws with hardpoint teeth, and two are Japanese pull saws with thin, replaceable blades. Between them they cover coarse framing-style cuts, fine finish cuts, and precise joinery-adjacent work.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most shops, the STANLEY FATMAX 20-045 is the best all-around hand saw, with a 15-inch blade and induction-hardened SharpTooth teeth. The STANLEY 20-526 cuts finer for finish work, the IRWIN Universal 20-inch adds reach for sheet goods, and the SUIZAN Ryoba and Gyokucho Razorsaw bring thin-kerf pull-stroke cutting to the bench.
Table of Contents
- Quick Answer
- STANLEY FATMAX Hand Saw, 15-Inch (20-045)
- STANLEY SharpTooth Finish Cut Hand Saw, 15-Inch (20-526)
- IRWIN Tools Universal Handsaw, 20-Inch (1773466)
- SUIZAN Ryoba Double Edge Saw, 9.5-Inch (SR-001)
- Gyokucho Razorsaw Ryoba 770-3600
- How to Choose a Hand Saw for Woodworking
- Who Should Skip These Saws
- FAQ
- Final Verdict
- Product and ASIN Reference
STANLEY FATMAX Hand Saw, 15-Inch (20-045)
The FATMAX 20-045 is the saw to buy if you want one Western hand saw that handles general cutting without fuss. Its blade is 15 percent thicker than a conventional saw blade, which helps it track straighter and resist binding in the cut. The 9-points-per-inch tooth pattern is a coarse, fast-cutting grind aimed at dimension lumber, plywood and general stock rather than fine joinery.
Specs:
- Blade length: 15 inches
- Tooth count: 9 points per inch
- Tooth design: SharpTooth technology with three cutting surfaces
- Teeth: induction-hardened for longer edge life
- Blade material: steel
- Handle: bi-material grip
- Warranty: limited lifetime
- Model number: 20-045
- Tier: mid-range
Because the teeth are induction-hardened, they hold their edge far longer than the teeth on a traditional file-sharpened saw, but they cannot be resharpened once dull. That trade suits most home shops: the saw stays sharp through a lot of general work, and the 15-inch blade is short enough to store in a toolbox yet long enough for full strokes across boards up to moderate widths.
STANLEY SharpTooth Finish Cut Hand Saw, 15-Inch (20-526)
The 20-526 is the finer-cutting sibling in the Stanley line. At 12 points per inch, its tooth line is noticeably finer than the FATMAX, so it leaves a cleaner surface on crosscuts in hardwood and trim stock. It uses the same SharpTooth idea, with three cutting surfaces per tooth, paired with induction-hardened teeth.
Specs:
- Blade length: 15 inches
- Tooth count: 12 points per inch (11 teeth per inch)
- Tooth design: SharpTooth technology with three cutting surfaces
- Teeth: induction-hardened
- Blade material: high-speed steel
- Weight: 0.8 pounds
- Handle: one-piece ergonomic design with 45-degree and 90-degree markings
- Model number: 20-526
- Tier: budget
This is the pick for crosscutting boards to final length, trimming molding, and other cuts where the surface left behind matters more than raw speed. The finer teeth start more easily and wander less at the beginning of a cut, which makes the 20-526 a friendly first hand saw for beginners as well as a useful second saw for experienced woodworkers who already own a coarse panel saw.
IRWIN Tools Universal Handsaw, 20-Inch (1773466)
The IRWIN Universal takes a different approach to tooth geometry. Its triple-ground teeth cut on both the push and the pull stroke, and the universal grind is designed to remove material quickly while still leaving a reasonably fine finish. The 20-inch blade gives it the longest stroke of the three Western saws here, which pays off on plywood sheets and wide boards.
Specs:
- Blade length: 20 inches
- Tooth count: 11 points per inch
- Blade thickness: 0.85 mm
- Tooth design: triple-ground teeth, universal tooth grind
- Blade feature: tapered-pitch nose for clearance and stability
- Coating: water-based lacquer to reduce binding
- Handle: high-density resin comfort grip with built-in 45-degree and 90-degree marking angles
- Model number: 1773466
- Tier: budget
The longer blade makes full, efficient strokes possible, and the handle sits at a proprietary angle intended to put force in line with the blade for easier starts. Like the Stanleys, the teeth are hardened and not resharpenable, so this is a use-it-until-it-dulls tool. It suits woodworkers who break down sheet goods by hand or want one longer saw for construction lumber and shop projects alike.
SUIZAN Ryoba Double Edge Saw, 9.5-Inch (SR-001)
The SUIZAN Ryoba is the entry point into Japanese pull saws in this roundup. A ryoba carries two tooth lines on one blade: a finer crosscut edge on one side and a coarser rip edge on the other, so one tool covers both directions of cut. Because it cuts on the pull stroke, the blade can be much thinner than a Western saw plate, which means a narrower kerf and less wood turned into sawdust.
Specs:
- Blade length: 9.5 inches
- Crosscut edge: 15 teeth per inch
- Rip edge: 9 teeth per inch
- Blade material: Japanese steel
- Cutting action: pull stroke
- Blade: replaceable
- Handle: traditional straight handle
- Model number: SR-001
- Tier: mid-range
The thin blade leaves a clean surface that needs little cleanup, and the pull stroke makes it easy to start a cut exactly on a line. Replacement blades swap in when the original dulls, since the fine impulse-hardened teeth are not meant to be filed. Woodworkers moving from power tools to hand-cut joinery often find a ryoba the most approachable Japanese saw, because it replaces both a crosscut and a rip saw for small and medium stock.
Gyokucho Razorsaw Ryoba 770-3600
Gyokucho is the maker most associated with the modern replaceable-blade Japanese saw, and the 770-3600 is its compact double-edged ryoba. The 180 mm blade pairs a 17-teeth-per-inch crosscut edge with a 6-teeth-per-inch rip edge, a combination aimed at smaller stock, detail work and precise cuts in hardwoods. Each tooth is individually impulse-hardened while the body of the thin blade stays flexible.
Specs:
- Blade length: 180 mm (about 7 inches)
- Overall length: about 18 inches
- Crosscut edge: 17 teeth per inch
- Rip edge: 6 teeth per inch
- Blade thickness: 0.5 mm
- Teeth: impulse-hardened
- Blade: replaceable
- Handle: contoured plastic grip
- Model number: 770-3600
- Tier: premium
The very fine crosscut teeth produce an exceptionally smooth surface, which makes this saw a strong choice for trimming, small joinery components and cut-off work near finished surfaces. The shorter blade limits it to smaller stock, so it works best as a precision companion to a full-size panel saw rather than as a shop’s only hand saw. Of the five saws here, it sits at the premium tier, reflecting its Japanese manufacture and blade quality.
How to Choose a Hand Saw for Woodworking
Start with tooth count. Coarse teeth, around 7 to 9 points per inch, remove material quickly and suit rough breakdown cuts in softwood and sheet goods. Fine teeth, around 11 to 15 points per inch, cut more slowly but leave a cleaner surface and are easier to start accurately, which matters for finish cuts and hardwood.
Next, decide between push and pull. Western saws cut on the push stroke and use thicker blades that resist buckling, which makes them forgiving for beginners and for heavy cuts. Japanese saws cut on the pull stroke, so the blade stays in tension and can be far thinner, giving a narrower kerf and a cleaner cut with less effort, at the cost of a lighter touch.
Blade length matters more than it first appears. A 15-inch saw is compact and controllable but takes more strokes on wide stock. A 20-inch or longer blade uses more of its tooth line per stroke and covers sheet goods better. Finally, accept the modern trade-off: hardpoint and induction-hardened teeth stay sharp much longer than traditional teeth but cannot be resharpened, so the blade or the whole saw is replaced when it dulls.
Who Should Skip These Saws
Skip this roundup if your cutting is mostly joinery. Dovetails, tenons and other fine joints are better served by the dedicated dozuki and dovetail saws covered elsewhere on this site, which have finer teeth and stiffened backs for tracking. Also skip these saws if you want a traditional resharpenable saw that can be maintained for decades with a file and a saw set; every saw here uses hardened teeth that are replaced, not sharpened. Finally, if nearly all your cuts are long rip cuts in thick hardwood, a dedicated rip-filed panel saw or a power saw will serve you better than a universal tooth grind.
FAQ
What tooth count is best for a general-purpose hand saw?
A tooth count around 9 to 12 points per inch is the most versatile range for general woodworking. Coarser teeth cut faster in softwood and sheet goods, while finer teeth leave a cleaner finish in hardwood. If you buy only one saw, a mid-range tooth count such as the 11-point IRWIN Universal is a sensible compromise.
Are Japanese pull saws better than Western hand saws?
Neither style is better in absolute terms; they suit different work. Japanese pull saws use thinner blades, so they cut a narrower kerf, need less effort and leave a smoother surface, which helps with precise cuts. Western saws have thicker, sturdier blades that tolerate rough handling and heavy cuts. Many shops end up owning one of each.
Can the saws in this roundup be resharpened?
No. All five saws use induction-hardened or impulse-hardened teeth, which stay sharp far longer than conventional teeth but cannot be restored with a file. On the two Japanese saws, the blade itself is replaceable. On the Western saws, the whole saw is the consumable once the teeth dull.
What blade length should a first hand saw have?
A 15-inch blade is the easiest starting point. It is long enough for full strokes across common board widths, short enough to control while learning, and compact enough to store in a toolbox. Move to a 20-inch saw if you regularly break down plywood or wide boards by hand.
Final Verdict
For a single general-purpose saw, the STANLEY FATMAX 20-045 is the safest buy, pairing a coarse, fast tooth line with a blade stiff enough to track well. The STANLEY 20-526 is the better choice when finish quality matters, and the IRWIN Universal 20-inch earns its place when longer strokes on sheet goods are the priority. Woodworkers who want thin-kerf precision should choose between the versatile SUIZAN Ryoba and the finer, premium Gyokucho Razorsaw 770-3600. Any of the five will cover the everyday cuts that a woodworking shop asks of a hand saw.
Related guides
You might also like
- Best Japanese Pull Saws for Woodworking: 5 Top Picks
- Best Dovetail Saws for Hand-Cut Joinery: 5 Top Picks
- Best Hand Planes for Woodworking: 5 Picks for Every Bench
- Best Marking Gauges for Woodworking: 5 Top Picks 2026
- Best Exhaust Fans for Garage Workshops: 5 Top Picks
- Best Mobile Workbenches for a Woodworking Shop on Casters
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




